PSI Model "W" Wrap Around Casing End Seals are designed for existing installations. A plastic backing is simply removed to expose the self-curing rubber on both ends of the end seal. Once the two are pressed together, a solid bond is created between mating surfaces and carrier/casing pipes. Model "W" end seals are available for all carrier/casing differentials.

Model "W" Wrap Around End Seals are designed to accommodate customer supplied specifications so they may be used for any size casing/carrier differential. Manufactured from 1/8" thick specially compounded synthetic rubber, PSI Model "W" end seals are extremely robust, resistant to wide variations in environmental conditions while eliminating the possibility of foreign material entering the opening between carrier and casing pipes.

Included with Model "W" End Seals are two appropriately sized hose clamps, which are used to secure the rubber material around both carrier and casing pipes. Installation is quick and easy, with only a screwdriver needed for tightening the hose clamps.

Benefits / Features

• Custom made to order.
• Quick and easy installation.
• Carrier pipe does not need to be centered within casing.
• Can be installed on existing casing installations.
• Screwdriver is only tool required for installation.
• Designed to last for the life of the piping system.
• Heavy-duty hose clamps supplied.
• Self-curing seam - simply remove plastic backing and press together.
• One-year warranty against manufacturing defects.

Material

EPDM 60

Temperature

250°F (121°C)

Thickness

1/8" (3.18 mm)

Color

Black

Hardware

304 stainless steel bands with worm screws

Sizing

Per customer specifications

Note:

To order Model "W" EPDM 600 Wrap Around End Seals, please indicate the following:

• Quantity
• Carrier Pipe O.D. (type and coating thickness if applicable)
• Casing Pipe O.D. (type and coating thickness if applicable.)