|
|
CANUSA Aqua-Shield™
Heat Shrinkable Sleeves
Heat shrinkable sleeves for corrosion protection
of water pipelines
Product Description
CANUSA Aqua-Shield™ is a family of heat
shrinkable products that have been specifically designed for the corrosion protection of
water pipelines. Various product configurations are available that utilize a crosslinked
polyolefin backing, coated with a protective, heat activated adhesive which effectively
bonds to metallic substrates and common pipeline coatings.
Features & Benefits
Long Term Protection
Once installed, Aqua-Shield™ provides
durable protection against abrasion and chemical attack. The high performance crosslinked
backing provides the superior abrasion resistance and mechanical strength required for
water transmission and distribution lines. Aqua-Shield™ effectively covers and
protects the pipe surface to prevent corrosion. Since no special primers are required,
less time is required for installation.
Flexible & Reliable Installation
The Aqua-Shield™ family of products are available in
various configurations for flexibility of installation.
- Aqua-Sleeve™. Patented one-piece
configuration incorporates a factory applied closure strip resulting in quick and reliable
field installation.
- Aqua-Wrap™. Supplied in a bulk roll
with separate closure seals, provides just-in-time customized lengths. This flexibility
results in reduced inventories and cost savings on the job site.
- High Shrink versions of these products are
designed for flanges, casings, bell and spigot joints and other high profile joints along
with large diameter pipes.
Assured
Performance
All Aqua-Shield™ products exceed the
requirements of AWWA standard C2 1694, and other industry standards.
About Canusa
Canusa is a leading manufacturer of
crosslinked, heat shrinkable products which, for over 30 years, have been used for sealing
and corrosion protection of pipeline joints and other substrates. Canusa high performance
products are manufactured to the highest quality standards and are available in a number
of conk Durations to accommodate your specific project applications.
|
Ordering Information &
Product Dimensions |
 |
| |
| |
Aqua-Sleeve |
Aqua-Wrap |
| Standard |
High Shrink |
Standard |
High Shrink |
| Sleeve Width |
150, 225,
450, 659, 760, 900 mm (6", 9", 18", 24", 32" 36") |
150, 225,
450, 659, 760, 900 mm (6", 9", 18", 24", 32" 36") |
| Pipe Size |
250 - 1500 mm
(10" - 60") |
1500 - 6500
mm
(60" - 252") |
| Adhesive |
1.65 mm
(65 mils) |
1.14 mm
(45 mils) |
1.65 mm
(65 mils) |
1.14 mm
(45 mils) |
| Backing |
0.92 mm
(36 mils) |
0.92 mm
(36 mils) |
0.92 mm
(36 mils) |
0.92 mm
(36 mils) |
| Sleeve |
3.16 mm
(126 mils) |
3.16 mm
(126 mils) |
3.16 mm
(126 mils) |
2.92 mm
(110 mils) |
Canusa is registered to ISO
9002-1994
|
