CANUSA High Shrink Sleeves are superior performance heat shrinkable products designed for corrosion protection of flanges, casings, bell and spigot joints, and other high profile pipeline couplings. High Shrink Sleeves consist of a crosslinked polyolefin backing, coated with a protective heat sensitive adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.

 Flexible & Reliable Installation

High Shrink products are available in three different configurations for flexibility of installation.

1. The patented Wrapid Sleeve™ (K) incorporates a one-piece pre-attached closure strip that has been factory applied resulting in quick and reliable field installation.

2. The CANUSAWrap™ (W) configuration is supplied in a bulk roll, with separate closure seals, providing just-in-time customized lengths. This flexibility results in reduced inventories and cost savings on the job site.

3. The CANUSATube™ (P) consists of a unique tubular configuration that has been factory constructed, resulting in quick and reliable field installation.

 Long Term Corrosion Protection

Once installed, the High Shrink Sleeve products have excellent structural integrity, and provide the substrate with durable protection against mechanical and chemical attack. The high performance crosslinked backing provides superior abrasion resistance and can be engineered for regular or high stress environments. In combination with CANUSA's high performance adhesives, the High Shrink Sleeve provides excellent resistance to cathodic disbandment resulting in effective long term corrosion protection.

  Assured Performance

The High Shrink products meet and exceed the requirements of the DIN 30 672 standard for gas and water, and have been fully tested and approved by DVGW (German Gas and Water Authority).

CANUSA is a leading manufacturer of crosslinked, heat shrinkable products which, for over 30 years, have been used for sealing and corrosion protection of pipeline joints and other substrates. CANUSA high performance products are manufactured to the highest quality standards and are available in Wrapid Sleeve™, CANUSAWrap™, CANUSATube™, and Wrapid Tape™ configurations to accommodate your specific project applications.

Sleeve Operating Characteristics

Product Selection Guide

P = CANUSATube™, K = Wrapid Sleeve™, W = CANUSAWrap™.
Choose your sleeve based on Application and Pipe Diameter.

Pipe Diameter	Coupling	Welded Joint	Flange DIN 2633, PN 16	Bell & Spigot
DN 25 1"	PMA 70/25	PMA 40/15	--	--	--
DN 32/40 1 1/2"	PMA 90/30	PMA 70/25	--	--	--
DN 50/65 2"	PMA 120/40	PMA 90/30	KLOX 185/85	--	--
DN 80 3"	PMA 170/80	PMA 120/40	KLOX 200/70	PMO 200/100	WLOX 600 mm
DN 100 4"	PMA 200/100	PMA 170/80	KLOX 220/80	PMO 200/100	WLOX 650 mm
DN 150 6"	PMA 255/130	Use PLA std Shrink Sleeves. Please refer to CanusaTube web page.	KLOX 315/110	PMO 255/130	WLOX 800 mm
DN 200 8"	PMA 380/190		KLOX 340/120	PMO 300/150	WLOX 1000 mm
DN 250 10"	KLOX 400/140		KLOX 400/140	PMO 375/190	WLOX 1200 mm
DN 300 12"	KLOX 485/170		KLOX 485/170	PMO 425/210	WLOX 1350 mm
DN 400 16"	KLOX 610/210	--	KLOX 610/210	--	WLOX 1700 mm
DN 500 20"	KLOX 760/270	--	KLOX 760/270	--	WLOX 2000 mm