|
|
Navigation:
CCP Home > Products
> Heat-Shrinkable Pipe & Pipeline Protection
Products
Navigation:
CCP Home > Products
> Moisture Sealing Products
CANUSA- Wrapid Coat™
Outer Wrap for Coated Pipe
A tough, polyvinyl chloride based
tape with special high tack adhesive
to resist corrosion of metal piping systems above and below ground.
| CANUSA-CPS Wrapid
Coat™ is tough, polyvinyl chloride based tape with
special high tack adhesive formulated to resist
corrosion of metal piping systems above and below
ground, fittings and joints on all mill-coated pipe as
an outer wrap for
Wrapid Bond™ coated pipe. |
| Features & Benefits
Adhesion & Creep
Resistance
- Resistant to
corrosive salt water, soil acids, alkalies and
salts, common chemicals, chemical vapors, and
exposure to outdoor weathering and sunlight.
- Resistant to impact,
abrasions, punctures, and tears. Wrapid Coat™ is a
highly conformable, all-weather 0.50 mm (20 mil)
thick tape designed for application over a wide
temperature range.
- High dielectric
strength, and excellent insulating properties.
Long Term Corrosion Protection
The high tack adhesive and tough backing
provides an effective barrier to water and oxygen which provides
effective corrosion protection and soil stress resistance.
Saves Time & Money
- Long shelf-life
(does not harden).
- Various widths
available with convenient roll lengths for ease of
inventory.
- Fast installation
with excellent adhesion on steel and many other base
surfaces without applying a primer.
- Impermeable to water
and oxygen.
Part of a Complete Line of
Wrapid™ Products
CANUSA-CPS products
such as
Wrapid Sleeve™, CanusaWrap™,
CanusaTube™, and
Wrapid Tape™ have been oil,
gas and civil infrastructure industry
standards for many years.
Wrapid
Coat™ is an outer wrap for
Wrapid Bond™ coated pipe.
|
Typical Product Properties
|
|
Property |
Test Standard |
Wrapid Coat™ |
|
Color of Backing |
- |
Black |
|
Color of
Adhesive |
- |
Black |
|
Thickness |
ASTM
D1000 |
0.51 mm
(20 mils) |
|
Elongation @ Break, |
ASTM
D1000 |
100%,
-12°C (10°F)
150%, 23°C (74°F) |
|
ensile Strength |
ASTM
D1000 |
70 N/cm
(40 pli) |
|
Adhesion to
Steel |
ASTM
D1000 |
3.3 N/cm
(1.9 pli), -12°C (10°F)
2.2 N/cm (1.3 pli), 23°C (74°F) |
|
Roll Unwind |
ASTM D1000 |
1.75 N/cm
(1.0 pli), -12°C (10°F)
1.75 N/cm (1.0 pli), 23°C (74°F) |
|
Water Vapor
Transmission Rate |
ASTM
D3833 |
1.0 g /
645 cm2 / 24 hrs |
|
Moisture
Absorption |
ASTM
D570 |
0.35% |
|
Dielectric
Strength |
ASTM
D1000 |
20 kV |
|
Application
Temperature Range |
- |
-12 to
65°C (10 to 150°F) |
|
Service
Temperature Range |
- |
-48 to
75°C (-55 to 167°F) |
|
