|
|
CANUSA Wrapid
Sleeve™
Pipeline Sleeve
One-piece protective pipeline sleeve with
pre-attached closure
Product Description
The CANUSA Wrapid Sleeve™ is a
one-piece wraparound sleeve designed for corrosion protection of buried and exposed steel
pipelines. Wrapid Sleeve™ consists of a cross linked polyolefin backing, coated with
a protective heat sensitive adhesive which effectively bonds to steel substrates and
common pipeline coatings including polyethylene and fusion bonded epoxy.
Features & Benefits
Rapid & Reliable Installation
Wrapid Sleeve™ has a patented one-piece construction
that incorporates a pre- attached closure strip as part of the sleeve.
|
 |
Because the closure has been factory applied,
quick and reliable field installation is easy to accomplish. Wrapid Sleeve™ is also
available with a broad range of adhesives to accommodate various operating temperatures
and soil stress conditions. To further optimize installation, Wrapid Sleeve™ products
are available in yellow, which include a thermochromic indicator to visually confirm
proper installation. A patented Windoweld feature is also available.
Long
Term Corrosion Protection
Wrapid Sleeve™ provides excellent
resistance to cathodic disbandment resulting in effective long term corrosion protection.
The high performance crosslinked backing, in combination with a broad range of adhesives,
can be engineered for regular or high stress environments. Once installed, Wrapid
Sleeve™ provides the structural integrity of a seamless tube, and provides the
substrate with durable protection against abrasion and chemical attack.
Saves Time & Money
With Wrapid Sleeve's™ unique
construction, less time is required handling, positioning and installing separate
closures. With the application of heat, this feature allows for fast, simple and complete
installation of the sleeve. No additional costly primers are required. This minimizes
installation time and labor costs while promoting high production rates. Wrapid
Sleeve™ is also available in a high shrink ratio for high profile joint protection.
Consult the High Shrink data sheet for additional information.
About CANUSA
CANUSA is a leading manufacturer of crosslinked, heat
shrinkable products which, for over 30 years, have been used for sealing and corrosion
protection of pipeline joints and other substrates. CANUSA high performance products are
manufactured to the highest quality standards and are available in Wrapid Sleeve™,
CANUSAWrap™,
CANUSATube™,
and Wrapid Tape™ configurations to
accommodate your specific project applications.
|
|
Temperature &
Coating Compatibility
Horizontal blue bars are minimum installation
temperature.
Vertical red bars are pipeline operating temperature.
Mastic Adhesives
L = heavy duty thickness, 0.9 mm
T = regular thickness, 0.6 mm |
Minimum
installation
temperature |
Main line
coating
compatibility |
| KLG & KTG |
50°C, 122°F |
PE, PP, FBE,
PU, coal tar,
bitumen |
| KLC & KTC |
60°C, 140°F |
| KLS & KTS |
65°C, 150°F |
| KLO & KTO |
75°C, 167°F |
| KLON & KTON |
75°C, 167°F |
| KLNN |
90°C, 195°F |
PE, PP, FBE |
| Hot Melt Adhesives |
| KLA |
60°C, 140°F |
PE, FBE |
| KLAS |
90°C, 195°F |
| KLE |
115°C, 240°F |
|
Typical Properties,
Mastic Adhesives
|
Adhesive |
Standard |
Unit |
KLG
KTG |
KLC
KTC |
KLS
KTS |
KLO
KTO |
KLON
KTON |
KLNN |
| Softening point |
ASTM E28 |
°C
°F |
100
212 |
90
194 |
77
171 |
102
216 |
102
216 |
124
255 |
| Lap shear |
DIN 30 672 |
N/cm2
psi |
8
12 |
30
44 |
40
58 |
40
58 |
40
58 |
52
75 |
Backing |
| Specific gravity |
ASTM D792 |
|
0.93 |
0.93 |
0.93 |
0.93 |
0.95 |
0.95 |
| Tensile strength |
ASTM D638 |
MPA
psi |
20
2900 |
20
2900 |
20
2900 |
24
3480 |
24
3480 |
24
3480 |
| Elongation |
ASTM D638 |
% |
600 |
600 |
600 |
700 |
700 |
700 |
| Hardness |
ASTM D2240 |
Shore D |
46 |
46 |
46 |
48 |
52 |
52 |
| Abrasion resistance |
ASTM D1040 |
mg |
45 |
45 |
45 |
35 |
30 |
30 |
| Volume resistivity |
ASTM D257 |
ohm-cm |
1017 |
1017 |
1017 |
1017 |
1018 |
1018 |
| Breakdown voltage |
ASTM D149 |
kV/mm |
27 |
20 |
20 |
27 |
20 |
20 |
Sleeve |
| Impact |
DIN 30 672 |
-- |
pass |
pass |
pass |
pass |
pass |
pass |
| Indentation |
DIN 30 672 |
-- |
pass |
pass |
pass |
pass |
pass |
pass |
| Peel |
ASTM D1000 |
N/cm
pli |
15
9 |
55
31 |
79
45 |
80
46 |
80
46 |
115
66 |
| Peel |
DIN 30 672 |
N/cm
pli |
8
5 |
50
29 |
70
40 |
65
37 |
65
37 |
90
51 |
| Cathodic disbondment |
ASTM G8 |
mm rad |
6 |
6 |
8 |
8 |
8 |
17 |
| Water absorption |
ASTM D570 |
% |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
| Low temperature
flexibility |
ASTM D2671-C |
°C
°F |
-40
-40 |
5
23 |
-20
-4 |
-14
7 |
-14
7 |
-15
5 |
| DIN approval |
DIN 30 672 |
class |
-- |
-- |
-- |
C30 |
C30 |
-- |
Typical Properties,
Hot Melt Adhesives
|
Adhesive |
Standard |
Unit |
KLA |
KLAS |
KLE |
| Softening point |
ASTM E28 |
°C
°F |
72
162 |
90
194 |
105
221 |
| Lap shear |
DIN 30 672 |
N/cm2
psi |
60
87 |
117
170 |
280
400 |
Backing |
| Specific gravity |
ASTM D792 |
|
0.93 |
0.93 |
0.93 |
| Tensile strength |
ASTM D638 |
MPA
psi |
20
2900 |
24
2480 |
24
2480 |
| Elongation |
ASTM D638 |
% |
600 |
700 |
700 |
| Hardness |
ASTM D2240 |
Shore D |
46 |
48 |
48 |
| Abrasion resistance |
ASTM D1040 |
mg |
45 |
35 |
35 |
| Volume resistivity |
ASTM D257 |
ohm-cm |
1017 |
1017 |
1017 |
| Breakdown voltage |
ASTM D149 |
kV/mm |
27 |
27 |
27 |
Sleeve |
| Impact |
DIN 30 672 |
-- |
pass |
pass |
pass |
| Indentation |
DIN 30 672 |
-- |
pass |
pass |
pass |
| Peel |
ASTM D1000 |
N/cm
pli |
50
29 |
120
70 |
120
70 |
| Peel |
DIN 30 672 |
N/cm
pli |
35
20 |
86
50 |
86
50 |
| Cathodic disbondment |
ASTM G8 |
mm rad |
13 |
11 |
15 |
| Water absorption |
ASTM D570 |
% |
0.05 |
0.05 |
0.05 |
| Low temperature
flexibility |
ASTM D2671-C |
°C
°F |
-32
-26 |
-28
-18 |
-20
-4 |
| DIN approval |
DIN 30 672 |
class |
C50 |
C50 |
-- |
| How to Order Example: KLO - 230 - 500 - BK |
 |
| |
| Position |
Description |
Entries |
| 1st |
Product
designation |
K - Wrapid Sleeve
L - heavy duty backing thickness, 0.9 mm (36 mils), or
T - regular backing thickness, 0.6 mm (25 mils)
O - adhesive as supplied for heavy or regular thickness |
| 2nd |
Pipe size |
55 - 1520 mm (2" - 60") for
heavy duty thickness L
55 - 500 mm (2" - 20") for regular thickness T |
| 3rd |
Sleeve width |
300, 450, 610, 915 mm
(12", 18", 24", 36") |
| 4th |
Color |
BK - black, YE -
yellow, WW - clear |
CANUSA is registered to ISO
9002-1994
|
