|
Description
Amcorr EZ Paste is a
versatile and economical sealing product for a wide range of applications
where water leaks are a problem. It provides quick and
economical installation and excellent sealing
properties. It has immediate adhesion to steel, PE, PP,
epoxy, polyurethane, PVC, etc. without roughening. No
cure or hardening time are required. It is storage
stable (dry/cool) with unlimited shelf life.
Applications
Amcorr EZ Paste is
engineered as a permanent solution for a wide range of
applications where water leaks can be a problem.
Applications include commercial, residential,
telecommunications, utilities, transportation,
electrical, water, wastewater, agricultural,
industrial, as well as others. Primary applications
include sealing around rooftop vents, pipes, metal roof
seams, flashings, residential and commercial roofing,
EPM roofing, and cable entries, holes and voids, cracks,
storage tanks, industrial pools, swimming pools,
manholes, basements, floors, cable joints and repairs,
etc. Amcorr EZ Paste is also used in conjunction with
other Amcorr Products such as
Amcorr EZ Wrap for
application at the tank chime (floor wall interface).
Physical Properties
Amcorr EZ Wrap is a
mastic-like material designed with synthetic properties
that will adhere to almost any surface without a primer.
Available in cartridges, it is designed as a
permanent solution for water leaks.
|
Color |
White |
|
Odor |
None |
|
Density |
1.4 |
|
Viscosity |
Mastic-like |
|
pH |
Neutral |
|
Shelf Life |
Unlimited |
|
Max Operating
Temperature |
160°F |
|
Min Temperature
(no cracks) |
-22°F |
|
Water Intake |
0% |
|
Adheres to Wet
Surface |
Yes, most cases |
|
Application |
Above and below
grade |
|
Stretch |
> 500% (putty) |
|
Chemical
Behavior |
Completely
inert. Can be used in conjunction with
gaskets and seals. |
|
Safety |
Non-toxic.
Please see
MSDS. |
:Installation
& Inspection
-
Clean the application
surface with a dry cloth. Remove as much loose
material as you can.
-
Apply the EZ Paste from
the cartridge using a caulking gun and press product
into the surface. In many cases, the application can
be done in a wet environment.
-
When high head
pressure is expected, cover with cement grout or a
rubber seal, since the product will remain flexible.
-
For cable conduits,
apply to a minimum of 2 inch depth.
-
Within half an
hour to an hour of application, visually inspect if
full adhesion has occurred.
If not or if a leak is found, reapply with
a caulking gun by injecting more product.
|
