Polyken offers a series of coating systems designed specifically for in-field applications on new construction pipe or reconditioning of existing pipelines. In-field or in-situ installation is economical and efficient. When Polyken cold-applied coating systems are used, a small investment in manpower and application equipment yields a big return in productivity and long-term performance. The reconditioning systems can be applied on existing operating pipelines, which means no loss of revenue or downtime. Polyken's non-toxic and environmentally safe materials ensure application-friendly conditions along the right-of-way (ROW).

Solvent-based liquid adhesive designed for machine application on abrasive-cleaned or wire brushed pipe surfaces. Contains stress-corrosion cracking inhibitors.
MSDS for Liquid Adhesive 1019
MSDS for Spray Liquid Adhesive 1019SPR

Solvent-based liquid adhesive designed for brush, roller or spray application to mechanically-cleaned reconditioned pipe surfaces. Contains stress-corrosion cracking inhibitors.
MSDS for 1027 Liquid Adhesive

Anti-corrosion layer designed for machine application under various climactic conditions. Excellent conformability to the primed pipe surface with proven long-term in-ground performance.

Mechanical protection coating layer designed for machine application. Protects Polyken 980 from backfill and in-ground construction damage.

Mechanical protection layer designed for machine application to protect the Polyken 2000 layer from backfill and construction damage. The polymeric backing is designed for long-term stability at elevated temperatures.

Hand-applied version of the Polyken 2000 system for application to field joints, fittings and specialty piping. Also used as an in-field repair coating system.

Pipe Wrap, Joint Coatings & Accessory Products

Polyken carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.

• Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
• Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
• Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
• Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
• ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
• Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Polyken^® has the tape coating for the job.
   

Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors.

All-purpose tape system for field application in the oil patch.

General utility tape for hand application on small diameter pipe, joints and fittings.

Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use.

Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified.

Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping.

100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems.

Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application.

Number of squares of coating  =   

Number of squares of coating  =   

• One square  = 100 square feet
• One square  = 9.29 square meters
• Area of pipe = diameter x 3.1416 x length

  
Polyken® Pipeline Coatings are manufactured in a ISO 9000 / QS 9000 certified manufacturing facility and are designed and tested in accordance with the most demanding industry and global standards.