A Farwest Corrosion Control Company

 

Home Products Contact Us Request Quote Order Online

 
 

 Navigation: CCP Home > Products > Epoxy Coatings > Denso Protal

Denso OuterArmour
By Denso


Liquid Epoxy Topcoat to Protect Denso Petrolatum Tapes.

Description

Denso OuterArmour is a two-component 100% solids liquid epoxy coating. It is a tough and durable topcoat that provides excellent abrasion resistance for Denso Petrolatum Tapes.

Uses

  • Mechanically protects Denso Petrolatum Tapes.
  • Flexible and durable.
  • Can be brush, roller or Denso applicator pad applied.
  • Provides excellent resistance to water, acids, alkalis, salts and mild solvents.
  • Can be applied in one coat up to 40 mils.

Application

Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning” or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 - 7,000 psi  is also suitable. Apply a thin fi lm of Denso Paste, which serves as a primer. Spirally wrap the tape with a minimum 1" overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams.

Mix each of the base and hardener to an even consistency. Pour Part B (Hardener) into Part A (Base) and mix until an even color is achieved making sure all sides of container are scraped. Immediately begin applying mixed material onto surface with brush, roller or Denso applicator pad. Special attention shall be taken to ensure that there are no pin holes or low film thickness areas. A second coat may be necessary.

 

Technical Data

Properties Data

Solids by Weight

100%

Color

Gray

Components

Two

Mixing Ratio by Volume

1 Part Base:1 Part Hardener

Weight per Gallon (Mixed)

11.8 lbs

Pot Life @ 77°F (100 Grams)

30 minutes

Theoretical Coverage @ 40 mils

40 sq. ft./gal.

Recommended Dry Film Thickness

Min. 20 mils

Application Temperature, Min

50°F (10°C)

Service Temperature

-30°F (-34°C) to 158°F (70°C)

Dry Time @ 77ºF
   
 To Touch
     To Handle
     To Recoat


2 hours
4 hours
2 to 4 hours

Handling & Storage

Properties Data

Storage

Store in a dry, well ventilated area. Shelf life 2 years.

Health & Safety

Wear protective clothing and ensure adequate ventilation. Avoid contact with skin and eyes. See material safety data sheet.

Packaging

Supplied in 1.5 liter kits. Other size available on request.


 

Corrosion Control Products Company

  

Corrosion Control Products Resources

 Search this Website
 Request Quote
 Order Products Online
 Industry Links
 CCP Suppliers
 Installation Guides
 MSDS
  

Cathodic Protection Products & Materials

  

Home

Products Search Request Quote Order Online

Corrosion Control Products Company
800-421-2623

Tel: 

 310-532-9314
Fax:  310-532-1472

1480 West Artesia Blvd., Gardena, CA 90248-3215, USA
 www.ccpco.com

© 1996-2011Corrosion Control Products Company | Privacy Statement
 

Integrity – Service – Quality
                  
... Since 1956