|
|
STOPAQ
EZ WRAP
Roll-Applied Sealing Material
A permanent solution to water leaks in a
roll-applied mastic-like
material that adheres to almost any dry surface without a primer.
|
Description
STOPAQ EZ WRAP
is a one-component viscous-elastic material that
acts as a moisture barrier and waterproof sealant to
prevent water infiltration and corrosion. It
provides excellent sealing properties plus quick and
economical installation. It has has immediate
adhesion to steel, PE, PP, epoxy, polyurethane, PVC,
etc. without roughening. There is no cure or
hardening time.
Dispensed in roll
form, EZ WRAP is strengthened by an embedded fiber
mesh. A white polyester, non-woven fiber-top layer
allows immediate painting or coating after
installation. EZ WRAP has unlimited shelf life with
dry or cool storage. It is non-toxic and safe to
work with.
Applications
- Tank
terminals: flexible seal at chime area
(floor to concrete interface).
- Pipeline:
above-ground pipes, encapsulation of existing
coating, crossings, river crossings.
-
Refineries/chemical plants: encapsulation
above ground pipe spans, crossings.
- Utility
market: manholes, sewer system
STOPAQ EZ Wrap is
engineered for use in many water leak applications,
offering long-term performance in commercial,
residential, telecommunications, utilities,
transportation, electrical, water, wastewater,
agricultural, and industrial as well as others. The
primary applications are sealing around rooftop
vents, pipes, metal roof seams, flashings,
residential and commercial roofing, EPM roofing, and
cable entries, holes and voids, cracks, storage
tanks, industrial pools, swimming pools, manholes,
basements, floors, cable joints and repairs, and
etc. EZ WRAP is also used in conjunction with other
STOPAQ Products such as
Series FN4200 Paste, STOPAQ WATERPLUG and STOPAQ
Series 3000 Fluid Gasket.
Properties
|
Color |
Gray |
|
Paintability |
Polyester back
can be painted |
|
Odor |
None |
|
Density |
1.4 |
|
Viscosity |
Mastic-like |
|
pH |
Neutral |
|
Shelf Life |
Unlimited |
|
Temperature
Range |
-60 to 160ºF |
|
Water Absorption |
< 0.57% (ASTM
D570 |
|
Water Vapor
Permeability |
< 0.00012
pounds/sq inch
(37.8ºC, 100% humidity, 90 days) |
|
UV Resistance |
No change in
properties
(17.5 GJ , University of Groningen) |
|
Adhesion |
100% adhesion to
most dry surfaces.
No adhesion to wet surfaces. |
|
Peel Strength on
PE, Steel |
> 11 pounds/sq
inch (DIN 30670/EN 12068) |
|
Application |
Above and below
grade |
|
Thickness |
30 mils |
|
Resistivity |
> 1012
ohm-cm |
|
Dielectric
Strength |
5 kV per 60 mils |
|
Salt Spray Test |
No corrosion
(ASTM D1000) |
|
Safety |
Non-toxic,
environmentally non-hazardous, no cyanides
or chlorides during extensive heat exposure.
|
|
Other Properties |
Flexible,
chemically inert, long life span, advanced
synthetic polymer technology (TPO). |
:Application
- Clean surface before
application to remove loose material.
- Remove clear EZ WRAP
release liner from gray adhesive.
- Use a seam roller to
press EZ WRAP on dry surface.
- Cover seams with a
1-inch overlap.
- In cold weather,
preheat surface using a hot air gun. Preheat rolls
by carrying them in cabin of a car.
- For inspection,
perform peel test within half an hour to an hour of
application. Try to peel away EZ WRAP to see if full
adhesion has occurred. If not, press down with a
seam roller and/or heat area with a hot air blower
or heat gun.
- See our page
STOPAQ application at tank
terminal in 4 easy steps.
Packaging
- 2 inch rolls x 24
feet, 16 rolls per carton
- 3 inch rolls x 24
feet, 8 rolls per carton
- 4 inch rolls x 24
feet, 8 rolls per carton
- 6 inch rolls x 24
feet, 4 rolls per carton
- 8 inch rolls x 24
feet, 4 rolls per carton
- 12 inch rolls x 24
feet, 3 rolls per carton
- Weight per carton:
approx 30 lbs
|
|
