Performance chemical blend designed to remove road film, dirt, de-icing salts, marine salts & acid rain residue.

CHLOR*WASH is an organic bonding chemical blend which aids in the removal of road films, dirt, and chloride, sulfate and nitrate salts. It contains no volatile organic compounds (VOC) and is non-flammable. CHLOR*WASH is biodegradable, and therefore is an integral part of a sustainable environment.

Key Features

• Specially formulated to wash all surfaces of salt and dirt.
• Maximum performance, yet safe to the environment.
• For use in pressure washers and hand washing applications.
• Easy to use
• Low cost
• Biodegradable
• Concentrated
• Non-hazardousNo residue
• No VOC's
• Non-flammable

Recommended Uses

Anywhere that dirt and salts need to be removed as a maintenance wash:

• Bridges
• Boats
• Trucks & Trailers
• Piping
• Salt Spreaders
• RV's
• Buildings
• Snow Removal Equipment
• Concrete & Masonry

Directions

Pressure Washing:  CHLOR*WASH may be added to the water of the pressure washer usually in a dilution ratio of 1:12. Add CHLOR*WASH by means of a metering pump, a reservoir water supply or a siphon device. Use potable water or other approved source. Flush washer and lines prior to application. In areas of heavy contamination, slow the wash speed to enable CHLOR*WASH to penetrate.

Hand Washing:  May be sprayed onto a surface full strength using a garden type sprayer, then rinse off. Scrubbing with a nylon bristle brush may be implemented to assist in removal of heavy buildup.

Safety Precautions:  Keep out of the reach of children. Do not mix with other chemicals. See MSDS for full precautions before use. This product is intended for professional use only.