Chlor Test "A" Chloride Ion Test for Abrasives by Chlor*Rid International

Navigation: CCP Home > Products > Coating Surface Preparation & Decontamination Products > Chlor*Rid
Navigation: CCP Home > Products > Inspection Instruments > Coating Surface & Contamination Testers

CHLOR*TEST "A"™
Chloride Ion Test for Abrasives
By Chlor*Rid International

An easy, accurate field test for chloride contamination of abrasives.

CHLOR*TEST CHLOR*RID CHLOR*RID DTS CHLOR*TEST "A" CHLOR*TEST "W"
CHLOR*TEST CSN CHLOR*WASH HOLD*BLAST CHLOR*TEST "C"

Prevent coating failure before you cause it!

Many coatings have failed from chlorides deposited on a surface by contaminated abrasives. Finally, there is a test that you can do in the field in minutes! No more sending samples to a laboratory, no waiting days for results, no high cost.

Easy to Use & Accurate

CHLOR*TEST™ "A" is the only complete and easy-to-use abrasive test kit - even the least experienced tester can get accurate results in minutes. When specifications require consistent, safe, reliable testing of abrasives, use CHLOR*TEST ''A" !

CHLOR*TEST ''A" is a self-contained, accurate, and reliable test kit. Each kit contains four (4) individual tests. Cross contamination, from test to test, is eliminated through one-time use of individual components. The components are pre-measured to ensure accurate results in parts per million. In addition, no temperature correction is needed from 41°F to 176°F.

CHLOR*TEST "A" uses ASTM D4940 principles, but offers the additional value of chloride ion-specific measurement. Use this innovative product confidently with any abrasive.