|
|
CHLOR*TEST
"CSN Salts"
Chloride / Sulfate / Nitrate
Ion
Test Kit
for Surfaces
By Chlor*Rid
International
The world's most complete "salt" field test kit
tests for surface
coating contamination by chlorides, sulfates and nitrates.
CHLOR*TEST
CHLOR*RID
CHLOR*RID DTS
CHLOR*TEST "A"
CHLOR*TEST "W"
CHLOR*TEST CSN
CHLOR*WASH
HOLD*BLAST
|
CHLOR*TEST "CSN Salts" Test Kit |
Recommended
for surface testing on:
- Pipelines
- Storage tanks
- Bridges
- Aircraft
- Mining facilities
- Ships
- Marine structures
- Cooling towers
- Power plants
- Offshore rigs
- Petrochemical plants
- Pulp and paper mills
- Steel fabrication
- Electronics
|
|
CHLOR*TEST
"CSN Salts"
A new Generation of
Test Kits
Most specifications do not address
sulfate or nitrates because there has never been a sulfate or nitrate
field test kit. Now there is a complete field test kit available that
tests all three salts. The revolutionary new method for testing salt
contamination is the most accurate field test on the market today.
|
 |
 |
 |
|
Cross-contamination is
eliminated with one-time use components. |
Nitrate testing is easy and
measures a wide 0-50 ppm range. |
Easy to perform -- does not
require special training. |
CHLOR*TEST "CSN Salts" offers to the
specifier the availability of trouble-free performance testing, in the
field, for chlorides, sulfates and nitrates with one extraction.
CHLOR*TEST "CSN Salts" uses a
unique patented extract solution, CHLOR*EXTRACT™, to retrieve surface
salt contamination. This special extract enhances retrieval rates,
thereby increasing accuracy. The greater the retrieval rate, the more
accurate the test results. Surface sampling is simplified by use of the
patented CHLOR*SLEEVE™. Sampling can be done overhead, vertically,
horizontally, or at any angle with this device.
|
- All test results are measured
directly in parts per million. No conversion charts are needed.
Part-per-million readings are a 1-to-1 ratio to micrograms per square
centimeter. No mathematical calculations are necessary.
- EPA-compliant. No need to select
a low or high range. Meter range is 0-100 ppm with auto-zero.
- European CE Mark of compliance
for electromagnetic compatibility and safety.
- Quantitative results achieved in
minutes.
- Five (5) individual tests per
test kit. Test kit refills available.
|
 |
|
All components are pre-measured and pre-dosed
for accuracy. |
Colorimeter Specifications
- Water resistant design
- Auto-zero
- Hinged light cover
- Digital direct readings
- European CE-mark compliant
- EPA-compliant
- 9-volt power source (included)
- Single wavelength
- Photometric ±0.001 absorbancy
- Accuracy ±1 ppm
- Low battery warning (BAT)
- Overrange indication (Er2)
- Burnt-out bulb indication (Er3)
|
Optional Accessories
- AC adapter: 110 Vac, 60Hz, or 220
Vac, 50 Hz
- RS-232 interface cable
|
Maximize corrosion
protection. Reduce premature coating failure.
Test every surface for salt contamination before coating
application. |
|
