|
|
Navigation:
CCP Home >
Products
> Inspection Instruments
> Non-Destructive Dry
Film Thickness Gauges
"Banana"
Digital Coating
Thickness Gauge
MikroTest® by ElektroPhysik
Uses magnetic attraction for
high-accuracy, high-resolution digital
coating thickness readings in less than 2 sec at touch of a button.
MikroTest®
Digital
Features at a Glance
- Digital display
- Electronically controlled
readings
- Faster readings -- less than
2 seconds
- Unmatched resolution
- Improved accuracy and
repeatability
- No calibration required
- One-hand operation
|
|
Digital Display. |
Because we
have incorporated electronics into the MikroTest® Digital, readings are
digitally displayed, which means no more reading interpretation disputes. |
|
Improved Accuracy |
While the
MikroTest® Digital utilizes the magnetic attraction principle,
measurements are controlled by a patented electronic technique which
produces greater accuracy. |
|
Higher Resolution |
With
electronically controlled readings and digital display, the MikroTest®
Digital provides unmatched resolution previously unattainable with gauges
using Magnetic Attraction. |
|
Faster Readings |
Readings
are activated at a touch of a button and not at the turn of a wheel.
Readings take less than 2 seconds. |
|
No calibration required |
Because the
MikroTest® Digital utilizes the Magnetic Attraction principle
with a permanent magnet, factory settings assure accurate, repeatable
readings. |
|
Certified |
Certification traceable to NIST available on Models 7G and 7F, other
models to ElektroPhysik standards. |
|
Model |
Measuring
Range |
Measuring
Uncertainty |
Minimum Substrate
Requirements |
|
7G |
0-12 mils |
0.08 mils
±3% of reading |
0.80" area
& .020" thick |
|
7F |
0-60 mils |
0.20 mils
±3% of reading |
1.20"
area & .020" thick |
|
7S5 |
20-200
mils |
±4% of
reading |
2.00"
area & .040" thick |
|
7S15 |
118-600
mils |
±4% of
reading |
4.00"
area & .28" thick |
| |
| |
Units of Measure:
Power Supply: |
Switchable mils / microns
6 Volt 4LR444 |
|
