|
|
Nordson 790
Wet
Film Coating Thickness Gauge
Four gauge faces use progressively sized grooves
to indicate full and fractional mil increments.
Operation
- Select the lowest scale on the gauge revolving
gauge block until the markers to be used are perpendicular to the copy
stamped on the gauge handle.
- Firmly and squarely set the scale on wet film to
be measured immediately after application. Make certain the outside
anvils rest firmly on the object.
- Withdraw the scale and examine markers.
- If all markers have touched the paint, move up to
the next higher scale.
- Continue this procedure until a marker is void of
paint. Wet film thickness is equal to the last marker touched.
Parts List
|
Part |
Description |
Quantity |
|
790 010 |
Gauge Wet Film,
0.5 - 20 mils |
1 |
|
790 015 |
Gauge Wet Film,
4 - 60 mils |
1 |
|
790 020 |
Gauge Wet Film,
10 - 500 microns |
1 |
|
|
