The StressTel T-Mike Basic is a compact, easy to use and rugged ultrasonic thickness gauge. Setup is fast and easy. The operator simply selects from five preset materials - steel, aluminum, stainless steel, cast iron, and plexiglass. The unit auto-calibrates and starts testing. A custom material can also be added by connecting the T-Mike B to a T-Mike E thickness gauge or to your computer.

Ergonomically designed to fit comfortably in your had, the T-Mike B is built to last, with an environmentally sealed water-resistant case and keypad. The T-Mike B features include an amber colored display to reduce eye strain, auto-calibration, and 300 hours of battery life with easy to replace alkaline or NiCad “AA” batteries.

The T-Mike B is manufactured to ISO 9001 standards and is backed by StressTel’s two-year warranty.

1. Lemo quick-disconnect connectors
2. Battery charger connector/data port
3. Built-in auto-probe zero block
4. Coupling indicator
5. Backlit LCD indicates modes, measurements and icons
6. Lightweight aluminum case
7. Weather resistant sealed keypad
8. POWER key
9. One-step material calibration key
10. Arrow keys for material selection
11. Operator selectable Metric or English units

• 2.5” wide (64 mm)
• 4.5” long (114 mm)
• 1.25 inches deep (33 mm)
• 11 ounces (312 grams)
• Environmentally sealed aluminum case
• Water resistant keypad

 Power Supply

• 4 AA Alkaline or NiCad batteries
• Interchangeable and easy to access
• 300 hours operating time 80 hours with backlight

 Materials

Preset calibrations for steel, stainless steel, aluminum, cast iron and plexiglass

0.025" to 19.999" (0.635 mm to 500 mm) depending on transducer, surface condition, temperature and material

 Display Resolution

• 0.001 or 0.01 mm
• Operating Temperature
• 0°F to 300°F (-18°C to 150°C)

 Display

• 4 1/2 digit amber backlit LCD
• 1/2 inch high digits
• Coupling indicator
• English/Metric selectable
• IN or MM displayed
• Display flashes to indicate battery replacement

General Purpose

General Purpose

General Purpose

Extended Wear

High Resolution

Thin Steel

Plate Aluminum

General Purpose

Cast Iron

High Temperature

The T-Mike B is manufactured in an ISO 9001 facility. All T-Mike corrosion thickness gauges have a full two-year warranty on parts and labor excluding batteries, transducer and cable. Specifications subject to change without notice.