Introducing the StressTel PocketMIKE™ general purpose thickness gauge.

The PocketMIKE™'s integrated product design combines the instrument and transducer into a single package not much larger than a traditional cabled probe, allowing for true single-hand operation.

The PocketMIKE™ thickness gauge is packaged in a machined stainless steel housing environmentally sealed to IP67. Four-button operation with Automatic On-Block Probe Zero and Automatic Gain Control further support StressTel's goal of providing very capable, yet simple to use instruments.

The high contrast backlit display can be mechanically and electronically rotated for easy reading in any orientation.

Single hand operation
Waterproof to IP67 / IEC529

Easy to Use

1. Power Key 

2. Increase value within CAL or SETUP 

3. Decrease value within CAL or SETUP 

4. SETUP key to change operating modes 

5. Initiates CAL function 

6. Backlight Status indicator 

7. Coupling indicator 

8. Thickness Mode indicator 

9. Velocity Mode indicator 

10. CAL Mode indicator 

11. Metric or Imperial Units 

PocketMIKE^™ Kit
  

• Instrument
• Wrist Lanyard
• One 1.5V AA Alkaline Battery
• Hard Shell Carrying Case
• Integrated Transducer
• Couplant
• Operating Manual
• Certificate of Calibration

Special Features

• Integrated Transducer, 5 MHz
• True Single Hand Operation
• Machined Stainless Steel Housing
• Environmentally Sealed to IP-67 / IEC-529
• Automatic On-Block Probe Zero
• Automatic Gain Control
• Automatic Timed Shutoff
• Auto Backlight Mode
• Known Thickness Calibration
• Known Velocity Calibration
• 4-Button Sealed Membrane Keypad
• User-selectable Measurement Units
• Exchangeable Probes

• Size:
  Height: 4" (100 mm)
  Housing diameter: 1.38" (35 mm)
  Probe diameter: 0.7" (17 mm)
• Weight: 5.2 oz (150 g)
• Power Source:
  Single 1.5 V AA Alkaline Battery
• Measuring Range:
  (material and application dependent)
  0.040" to 9.999" (1.0 to 250 mm)
• Displayed Resolution:
  0.001" to 9.999", above 0.01"
  (0.01 to 99.99 mm, above 0.1 mm)
• Operating Temperature:
  14°F to 122°F (-10°C to +50°C)
• Probe Surface Temperature:
  14°F to 212°F (-10°C to +100°C)