Two-component tubes for application of Protal 7125, fast-cure, low-temperature epoxy pipeline repair coating.
Denso OuterArmour is a two-component 100% solids liquid epoxy coating. It is a tough/durable topcoat that provides excellent abrasion resistance for Denso Petrolatum Tapes.
Uses
Application
Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 “Hand Tool Cleaning” or SP3 “Power Tool Cleaning”. High pressure water wash of 3,000 - 7,000 psi is also suitable. Apply a thin fi lm of Denso Paste, which serves as a primer. Spirally wrap the tape with a minimum 1" overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams.
Mix each of the base and hardener to an even consistency. Pour Part B (Hardener) into Part A (Base) and mix until an even color is achieved making sure all sides of container are scraped. Immediately begin applying mixed material onto surface with brush, roller or Denso applicator pad. Special attention shall be taken to ensure that there are no pin holes or low fi lm thickness areas. A second coat may be necessary
Technical Data
Properties | Data |
---|---|
Solids by Weight |
100% |
Color |
Gray |
Gloss |
Semi-Gloss |
Components |
Two |
Mixing Ratio by Volume |
1 Part Base:1 Part Hardener |
Weight per Gallon (Mixed) |
11.8 lbs |
Pot Life @ 77°F (100 Grams) |
30 minutes |
Theoretical Coverage @ 40 mils |
40 sq. ft./gal. |
Recommended Dry Film Thickness |
Min. 20 mils |
Application Temperature, Min |
Min. 50°F (10°C) |
Service Temperature |
-30°F (-34°C) to 158°F (70°C) |
Dry Time @ 77ºF |
|
Handling & Storage
Properties | Data |
---|---|
Storage |
Store in a dry, well ventilated area. Shelf life 2 years. |
Health & Safety |
Wear protective clothing and ensure adequate ventilation. Avoid contact with skin and eyes. See material safety data sheet. |
Packaging |
Supplied in 1.5 liter kits. Other size available on request. |