Anotec High Silicon Cast Iron Anodes, Impressed Current

Navigation: Home > Products > Impressed Current Anodes > Anodes - Cast Iron

Specialty Anodes by ANOTEC
High Silicon Cast Iron Anodes

Product Description

Composition, ASTM A518 Grade 3

Silicon: 14.20 - 14.75%

Chromium: 3.25 - 5.00%

Manganese: 1.50% max

Carbon: 0.70 -1.10%

Copper: 0.50% max

Molybdenum: 0.20% max

Cable Connections Provisions

Anotec manufactures anodes to accommodate customers' connection requirements, including both established industry standards methods and special custom designs whenever warranted by demand. Typical features are:

Type A: Cast groove in hollow anode interior accepts customers' snap ring connector or caulked lead.

Type S: Cast cavity in anode end accepts caulked lead connections.

Type T: Cast conical seat in tubular anode accepts Anotec conical lead anchor soldered to cable.

"Chill Cast" in Metal Molds

Assures consistent weight, greater density, less flake graphite grain boundary, and lower chemical segregation than Sand Cast Anodes. The ANOTEC Chill Cast structure is similar to "Spin Cast" Tubular Anodes. (Shell Cast Anodes are available on application.)

Performance

Accelerated corrosion tests confirm that Anotec Chill Cast Anodes perform significantly better (up to 19%) than sand cast anodes in chloride and sulfate environments. Test reports are available on request.

Overview
High Silicon Cast Iron Anodes

Type	Shape	Connection Features	Nominal Dimensions inch (mm)		Nominal Area sq ft (sq m)	Nominal Weight lbs (kg)
Type	Shape	Connection Features	Diameter	Length	Nominal Area sq ft (sq m)	Nominal Weight lbs (kg)
1F9-S	Solid rod	Type S, caulked lead	1.1 (28)	9.0 (229)	0.24 (0.022)	2.0 (0.91)
15K12‑S	Solid rod	Type S, caulked lead	1.5 (38)	12 (300)	0.39 (0.036)	5.2 (2.4)
2009	Hollow tube duct anode	Caulked lead or press fit bronze insert	2 (51)	9 (230)	0.39 (0.036)	4.6 (2.1)
2212 Z	Hollow tube	Conical seat zinc anchor swaged for single or string connection	2.2 (56)	12 (300)	0.6 (0.056)	6.2 (2.8)
2224 Z			2.2 (56)	24 (600)	1.1 (0.102)	14.8 (6.7)
2242 Z			2.2 (56)	42 (1060)	2.0 (0.185)	25 (11.4)
2248 Z			2.2 (56)	48 (1220)	2.3 (0.213)	29 (13.1)
2624 Z	Hollow tube	Conical seat zinc anchor swaged for single or string connection	2.6 (66)	24 (600)	1.3 (0.120)	20 (9.1)
2642 Z			2.6 (66)	42 (1060)	2.4 (0.222)	36 (16.3)
2648 Z			2.6 (66)	48 (1220)	2.7 (0.250)	41 (18.6)
Button	Hemispherical "button" with bolt hole	Type S, on base caulked lead	6 (150)	3 (76)	0.33 (0.030)	18 (8.2)
Bullet	Condenser "bullet" anode	Threaded steel stud	3 (76)	6 (150)	0.5 (0.046)	12 (5.5)
12B15	Bridge deck "pancake" anode	Type S, caulked lead	12(300)	1.5 (38)	1.1 (0.102)	40 (18.1)