thermOwelds® NEW thermOcap® is a 4" x 4" prefabricated assembly designed as a protective cover for exothermically welded leads to pipes and tanks. When pressed by hand into position over the anode lead wire weld, it forms a thick, highly resistant electrical insulation seal over the weld, the end of the lead wire and the surrounding area of the pipe or tank.

• Elongated wire inlet allows the cap to conform easier to the pipe
• Outer shell designed to prevent crushing
• Butyl rubber filled dome
• Easier field application
• Contractor friendly

Molded plastic dome filled with corrosion resistant compound on a base of thick elastomeric tape.

4" x 4"

21 mils

1-5/8" x 5/8"

3/8" x 1-3/8"

2-3/4 oz

1/8"

35°F to 170°F

-20°F to 225°F