|
 thermOwelds® NEW thermOcap®
PC is a 4" x 4" prefabricated assembly designed
as a protective cover for exothermically welded leads to
pipes and tanks. When pressed by hand into position over
the anode lead wire weld, it forms a thick, highly
resistant electrical insulation seal over the weld, the
end of the lead wire and the surrounding area of the
pipe or tank.
As opposed to the thermOcap,
the thermoOcap PC is pre-primed with
an elastomeric adhesive and does not require a spray
primer.
- Pre-primed for
1-step application.
- Elongated wire
inlet allows the cap to conform easier to the pipe
- Outer shell
designed to prevent crushing
- Butyl rubber
filled dome
- Easier field
application
- Contractor
friendly
|
