If you need cathodic protection, you may need the Kirk Cell. It acts like an "electrochemical switch," blocking DC voltages in the cathodic protection range, while instantaneously shunting hazardous voltages to ground.

How the Kirk Cell works

The Kirk Cell consists of multiple pairs of stainless steel plates immersed in a potassium hydroxide electrolyte solution. An oil seal floating on the electrolyte prevents evaporation, absorption of atmospheric gasses and excessive foaming under high current flow. DC current flow through the Kirk Cell causes a film of gas to form on the plates, offering high resistance to low voltage DC current. As the applied voltage across the cell increases, current flow through the cell increases, causing the thickness of the polarization gas film to increase. When the leakage threshold is exceeded, the film starts to break down, and the cell resistance quickly decreases as the applied voltage increases. AC voltages and higher DC voltages see the Kirk Cell as a dead short.

Suitable for Outdoor Installation

Galvanized steel enclosures are offered for exterior installations of the cell, with locking features if desired. The enclosures are also available in 11 gauge, small arms proof construction. Now available, the 5-2/2 and 50-2/2 Dual Enclosures house two Kirk Cells.