• Steel reinforced frame
• Rugged ballistic cloth with heavy duty hardware
• Large zippered storage compartment with 25 pockets
• Weather resistant
• Carry all your tools to the job
• One year warranty

• Snap-on holster for all Series 10 meters.
• Absorbs shocks and protects the meter from rough handling.
• Built-in stand and hanger-loop allow meter positioning.
• Molded hanger-loop can also function as stationary probe holder, allowing one-handed operation and contact of test points.
• One year warranty

• Tough polypropylene case provides protection against rough handling and bad weather.
• For any Fluke handheld DMM or Fluke 50 Series thermometer, except Series 10 and 860 Series, and most Fluke DMM accessories.
• 1 year warranty

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you.

• Tough polypropylene.
• Exterior shell measures 30.5 x 36 x 10.5 cm (12" x 14.2" x 4.1").
• Interior cavity measures 23 x 29 x 6.5 cm (9" x 11.5" x 2.5").
• One year warranty

• Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer, and a pouch for test leads and other accessories.
• Durable polyester 600D case construction for long life.
• Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
• One-year warranty.

• Includes adjustable padded space with a moveable Velcro divider for protection of two test tools, such as a digital multimeter and a current probe.
• Durable polyester 600D case construction for long lif
• Compatible with Fluke 20, 70, 11X, 87V, 170 Series digital multimeters and other similar format test tools.
• One-year warranty.

• Heavy duty case with accessory storage compartments.
• 1 year warranty

• Zippered carrying case with detachable external pouch.
• 1 year warranty

• Soft sided, zippered, vinyl carrying case for all 10 Series meters.
• Inside pockets to carry a meter, manual, and test leads.
• Convenient 3" (76 mm) belt loop accommodates tool belts.
• 1 year warranty

• Heavy duty case with accessory storage compartments.
• 1 year warranty

• Zippered carrying case with storage compartments.
• Allows hand or shoulder use.
• One year warranty

• Heavy duty case made of shock resistant polypropylene.
• Top cover snaps on back to serve as tilt stand.
• Carrying handle and storage compartment for test leads and small accessories are part of case.
• For Fluke 25 and 27, also holds 80 Series meters in holsters.
• One year warranty

• Zippered carrying case with durable vinyl exterior.
• Has belt loop and an inner pocket to store test leads or small accessories.
• Ideal companion case to Fluke 61 & 65 Infrared Thermometers and Fluke 320 series Clamp Meters.
• 1 year warranty

• Large vinyl soft case with water resistant zipper and one inside pocket for test leads or small accessories.
• Convenient 3" (76 mm) belt loop accommodates tool belts.
• For Fluke 20, 50 or 70 Series meters in C70 Holster; or 80 Series meters in C81 Holster. Also for use with PV350.
• Size: 8.3" H x 4.9" L x 2.75" D (18 x 125 x 70 mm).
• One year warranty

• Case top opens laterally to allow use of test tool without removing it from the case and includes a Velcro strap to secure the test tool.
• Durable polyester 600D case construction for long life.
• Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters and other similar format test tools.
• One-year warranty

• Zippered carrying case with inside pocket belt loop and inside meter strap.
• One year warranty

• A case as tough as your Fluke meter... and cool too!
• Oiled genuine top grain cowhide, rugged construction with heavy duty stitching and reinforced rivets.
• Large tool belt loop and top flap to secure meter.
• Designed for Flukes 70 and 20 Series meters, but also accommodates most other Fluke meters including 10 Series and a number of Fluke thermometers and process meters.
• Size (H x L x W): 2-1/4" x 9-1/4" x 5" (57x 235 x 127 mm).
• One year warranty

• Oiled genuine top grain cowhide.
• Oil tanned for long life.
• Rugged construction with heavy duty stitching and reinforced rivets.
• Large tool belt loop and top flap to secure tester.
• Holds Fluke T2, T5 and other Fluke electrical testers.
• Size (W x L x D): 3-1/8" x 10" x 2-1/8" (79 x 254 x 54 mm)
• One year warranty

• Easy-to-clean, vinyl snap-on holster absorbs shocks and protects meter.
• Unique Flex-Stand™ allows meter to hang, lean or stand for best viewing position. Lead/probe storage on back.
• High-visibility yellow.
• For all 70 and 50 Series and Models 21, 23, 29 meters.
• Built-in probe and lead storage.
• One year warranty

• Zippered carrying case
• 1 year warranty

• Zippered carrying case with detachable external pouch.
• 1 year warranty

• Zippered carrying case with inside pocket and belt loop.
• One year warranty

Special value starter kit for the electrical professional who already owns a Fluke T5 Electrical Tester or is thinking of buying one. Includes sharp test probes, alligator clips for hands free connections, and a soft carry case to protect your tester when not in use and store accessories. 1000 V CAT III, 600 V CAT IV rated. Included with kit:

• TP220 SureGrip test probes with removable comfort grips.
• AC285 SureGrip Large jaw alligator clips.
• C33 Zippered soft case