The new line of Fluke clamp meters, introduced in September 2010, addresses needs that electricians and technicians have been waiting for in clamp meters from Fluke. They solve classical problems:

• Tight cabinets and bundled wires that make it difficult to use a regular clamp meter.
• Large or awkward conductors a regular clamp meter can’t get around to measure.
• Needing a co-worker’s help to get a measurement.
• Wanting to measure more than 1000 Amps AC.

The new clamp meters address all of these common problems, plus more - reducing frustrations and addressing unique needs - all with the quality and accuracy that user can only get from Fluke tools. Fluke stands behind these products, only making the best

• Industrial maintenance technicians
• Control technicians
• Electricians - in house
• Electrical and HVAC contractors

• Industrial equipment
• Industrial controls
• Electrical systems
• Commercial / industrial HVAC

373

True-rms and state of the art signal processing allows for use in noisy electrical environments while providing stable readings on non‑linear signals.

Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while
taking a measurement.

Capacitance for troubleshooting start and run motor capacitors.

374

600 A ac and dc current measurement and CAT III 1000 V, CAT IV 600 V safety rating allows you to work wherever the job takes you.

Proprietary inrush measurement technology to filter out noise and
capture motor starting current exactly as the circuit protection sees it

Compatible with iFlex flexible current probe to expand the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

375

Increased measurement functionality with increased resistance range, frequency measurement and mV dc to interface with other accessories

Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings.

376

2500 A ac current measurement with iFlex flexible current probe (included).

1000 A ac and dc current
measurement with fixed Jaw.

1000 V ac and do voltage measurement.

381

Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy.

2500 A ac current measurement with
iFlex flexible current probe (included).

The removable magnetic display can be conveniently mounted where it is easily seen

365

Small, detachable jaw makes accessing wires and viewing the display easier.

True-rms 200 A ac and dc current measurement.

Built in flashlight/torch allows for easy illumination and identification of wires.

i2500-10/18

Allows upgrade of compatible meters to 2500 A ac current measurement capability.

Ability to measure awkward sized conductors and improved wire access.

6 ft cable provides increased display flexibility.

iFlex flexible current probe

999.9A

999.9A

600.0A

600.0A

600.0A

2% ± 5 dig.

2% ± 5 dig.

2% ± 5 dig.

2% ± 5 dig.

2% ± 5 dig.

2% ± 5 dig.

Range

2500.0A

2500.0A

2500.0A

2500.0A

-

-

3% ± 5 dig.

3% ± 5 dig.

3% ± 5 dig.

3% ± 5 dig.

DC current

Range

999.9A

999.9A

600.0A

600.0A

-

Accuracy

AC voltage

Range

Accuracy

DC voltage

Range

Accuracy

mV dc range

Resist-ance

Range

60,000 Ω

60,000 Ω

60000 Ω

6000 Ω

6000 Ω

Accuracy

1% ± 5 dig.

1% ± 5 dig.

1% ± 5 dig.

1% ± 5 dig.

1% ± 5 dig.

Capaci-
tance

Range

-

1-1000 µF

1-1000 µF

1-1000 µF

10-1000 µF

Accuracy

-

1% ± 4 dig.

1% ± 4 dig.

1% ± 4 dig.

2% ± 2 dig.

Continuity

Frequency

Remote Display

AC response

Backlight

Data hold

Min/Max/Avg

Inrush

Size (HxWxD)

Max wire diameter

Weight (g)

Category rating

Warranty