|
Dimensions |
11 ½ inches long and 6 ½ inches wide and shaped to fit
most data collectors. |
|
Weight |
2 lbs. |
|
Meter Tray |
Light-weight UHMW high dielectric plastic survey tray
with stainless steal corner connector rings. |
|
Mounting |
SECO type data collector cradle assembly. |
|
Splitter Box |
Constructed of high-impact strength polystyrene plastic
mounted to the underneath of the survey meter tray. |
|
Straps |
Neck strap is heavily padded and includes nylon
lined neck pad to wick away perspiration. The neck strap
hooks to the survey meter tray front connector rings. |
|
Rear meter tray straps hook to the neck strap
with quick disconnects which have a non-slip grip. The
rear meter tray straps connect to the meter tray back
connector rings. |
|
Waist straps are used to stabilize the survey
meter tray and hook to the back connector rings of the
survey meter tray and to the survey pack waist band or
the surveyor’s belt loops. |
|
Strap Connections |
The neck strap and waist straps used a stainless steal
trigger snap for quick connect and disconnect with
survey meter tray’s corner connector rings. |
|
Setup |
The survey meter tray is fully wired and ready to use.
Survey test/data probes can be connected to the splitter
box’s 3-pin female plugs (right probe to the right plug
and left probe to the left plug). Data lead wire with
3-Pin jack connects to the data collector/meter remote
trigger port. |
