|
|
PosiTest® Coating Thickness Gage
by DeFelsko
| For the
non-destructive measurement of non-magnetic coatings such as (paint, enamel, plastic,
galvanizing, metalizing, plating, etc.) on STEEL. Easily measures small parts of almost
any shape. |
Accuracy
- Permanently calibrated.
- Highly wear resistant carbide probe for longest life and
continuous accuracy.
- Remove center of dial cover for easy recalibration
adjustment.
- Modern and up-to-date Scale Ranges fit all applications
Durability
- Extra rugged housing, not affected by mechanical shock,
water, acid or solvents.
- Unique overall design, fully supported, positive
positioning, no pivoting tendencies during measurement.
- Can be used fully supported or with only the front probe
area contacting the surface.
- Functions on a permanent rare-earth cobalt magnet, no
battery.
- Explosion-proof - refinery safe.
- 1-year warranty.
 Easy to Use
- Positive visual and audible indicators to designate when
thickness reading is established.
- "V" grooves in probe housing and Gage base allow
correct positioning on cylindrical objects
- Compact, lightweight, precisely balanced, independent of
gravity - can be used in any position.
- GO/NO-GO button can be pre-set for rapid measurement.
- Carbide measuring probe for long life.
- Probe contact and dial rotation all in a one-finger
operation.
- Furnished with wrist strap, neck strap and instructions in a
high quality leather case with belt loops for your convenience.
|
For hot dip galvanizing, hard chrome metalizing, paint, enamel,
plastic coatings on steel. |
For electroplating, thin paint films, phosphating on steel. |
 |
 |
Scale
FM:
Tolerance: |
0 to 80 mils.
± 0.2 mils up to 4 mils.
± 5% of reading over 4 mils. |
Scale
GM:
Tolerance: |
0 to 8 mils.
± 0.04 mils up to 0.8 mils.
± 5% of reading over 0.8 mils. |
Scale
F:
Tolerance: |
0 to 2000 microns.
± 5 microns up to 100 microns.
± 5% of reading over 100 microns. |
Scale
G:
Tolerance: |
0 to 200 microns.
± 1 micron up to 20 microns.
± 5% of reading over 20 microns. |
Based on N.I.S.T. (NBS) Standards.
Conforms to ASTM and international standards.
|
