|
|
PosiPen® Coating Thickness Gage
by DeFelsko
| The precision
instrument that you can carry like a pen. Measures non- magnetic coatings such as paint,
enamel, plating, hot-dip galvanizing on STEEL. Ideal for measuring on small, hot or hard
to reach surfaces. |
PosiPen can be placed with pinpoint accuracy on any
location of the part to be measured, which other gages may not be able to reach.
PosiPen
has a very small unique magnet, and therefore can measure on extremely small parts, on
peaks and valleys.
PosiPen measures
- On hot surfaces
- On small surfaces
- In different positions
Two scales: mils (inch) and microns
(metric)
- Range 0.25 to 20 mils (inch). Tolerance +10% and 0.1
mil.
- Range 5 to 500 microns (metric). Tolerance +10% and
2.5 microns.
Manufactured in two versions
- PosiPen Model A for measurements on surfaces with
normal temperatures.
- PosiPen Model B for measurements on surfaces with
extreme temperatures (between -150oF and +450oF or -100oC
and +230oC).
Triple Indicator
- Use the red/silver joining line when the Gage is
horizontal (walls).
- Use the green line when the gage is pointing straight
down (green/ground).
- Use the blue line when the Gage is pointing straight
up (blue/sky).
 Easy to Use
- Place the tip of the PosiPen on the coated surface
and allow the magnet to contact.
- Pull the PosiPen straight from the object to be measured
while keeping close watch on the appropriate indicator.
- Note the reading when the magnet releases.
Easy to Carry
- Just like a ball point pen, it is always there when you need
it!
|
|
