• No more clothing caught on barbed wire.
• No more crawling under or between fences.
• Fastens to almost any t-post.
• Supports up to 1000 pounds!
• Lightweight and compact!
• Weighs just eight ounces!

Description

The T-Post Stepper is the ultimate fence climber. It makes it easy to climb fences that are supported by T-posts. No more clothing caught on barbed wire! No more crawling under or between fences! Here's a product that will become indispensable to anyone with a need to climb fences.

The T-Post Stepper is compact and lightweight. It can easily be carried inside a pocket, a glove compartment or toolbox, yet it can support up to 1,000 pounds! Cast in aircraft aluminum, a high strength, lightweight aluminum alloy, the T-Post Stepper weighs just eight ounces. Constructed with a ridged step surface, it is only 8 inches long, 2-3/16" wide, and 1" thick.

It's as easy as 1, 2, 3! Step up, swing over, and step off!
 

Install the T-Post Stepper on the t-post at a height of about 12-18" so you can straddle the top wire. Fit the bottom slot of the T-Post Stepper over the lug on the t-post.

To use T-Post Stepper:

1. Grasp the top of the t-post with both hands and place one foot on the T-Post Stepper. Pull yourself up until standing with one foot on the T-Post Stepper.
2. Continue to hold onto the top of the t-post with both hands as you swing your free leg over the top of the fence.
3. Place this lead foot on the opposite side of the T-Post Stepper and transfer your weight to this foot.
4. Still holding onto the top of the t-post, swing your trailing leg over the top of the fence.
5. Place your trailing foot on the ground and step off the T-Post Stepper. Pull up on T-Post Stepper to remove from the t-post lug.