|
Holloway
Type JB
This is a 0.01 ohm, 5 ampere capacity manganin strip shunt designed for
use in junction boxes. Size is 1/2" x 3-3/4". Standard hole size is for #10
(3/16") screws. Optional hole size for 1/4" screws is available. Hole spacing is 3-1/4".
|
 |
|
Holloway Type RS
This 0.01 ohm shunt is rated at 6
amps and is made from #12 manganin wire. With a overall length of 5-3/4",
the shunt can be bent to fit into small areas. The RS shunt is used for
junction boxes, test stations and similar applications.
|
 |
|
Holloway Type SO
This is a 0.001 ohm shunt is rated
at 50 amps and is constructed of #4 manganin wire and 1/4" x 1/2" x 1-1/8"
brass end plates for mounting. Mounting holes in the brass plates are made
for 1/4"-20 screws and are on 3-3/8" centers. 10-32 screws are provided for
permanent lead connections.
|
 |
|
Holloway Type SS
This is a 0.001 ohm shunt is rated
at 25 amps and is constructed of copper nickel alloy ribbon. Provided
mounting holes are on 2-3/4" centers for a 3/8" bolt.10-32 screws are
provided for permanent lead connections.
|
 |
|
Holloway Type SW
The type SW shunt is available
in a number of current ratings from 5 to 200 amps and is constructed of
manganin ribbon with brass end plates. Mounting holes vary with the shunt
rating.
|
 |
