|
|
Testox Cathodic
Protection Test Stations
by Gerome
Series 100
Pipe-Mounted Test Station
5 terminals standard
7 terminals available
6" high, 3-3/4" wide, 2-1/2" deep
Slip fit: 3/4" - 3"
Threaded: 3/4", 1", 1-1/4", 1-1/2", 2".
Shipping weight: 2-1/2 lbs
Pre-wired or unwired
Plastic or aluminum conduit
|
 |
Series 300
Mini-Series Test
Station
2 or 4 terminals standard
5" high, 1-1/2" wide , 2-3/4" deep
Slip fit: 3/4"
Threaded: 3/4"
Available with conduit
Shipping weight: 1 lb
|
 |
Series 400
Pipe Mounted Test
Station
- 5 terminals standard, up to 10 terminals
available.
- 6-3/4" high, 5" wide, 3" deep.
- Optional back and sides.
- Watertight.
- Slip-fits: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"
- Threaded: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"
- Shipping weight: 2-1/2 lbs.
|
 |
Series 500
500 For Urban Paved Locations
500A For Burial in Sand or Dirt
5 terminals standard
Corrosion resistant cast aluminum top
Durable plastic pipe body
15-1/2" high, 4-1/2" diameter (500)
18-1/2" high, 4-1/2" or 6-1/2" diameter (500A)
Anchoring bolts
Ship. weight: 3 lbs (500), 4 lbs (500A)
|
 |
Readily accessible terminal is mounted directly beneath cover. |
Series 600
Right-of-Way Test Station
5 terminals standard
7 terminals available
Pre-wired or unwired
Solid steel construction
6 feet long with an I.D. of 3" for rugged
use. Also features an arrangement for locking cap to the test station
(lock not included)
Shipping weight: 70 lbs
|
 |
Series 700
Pipe Mounted Test Station
5 terminals standard
Up to 10 terminals available
8" high, 4-1/2" wide, 2-1/2"deep
Slip fits: 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4"
Shipping weight: 3-1/2 lbs
|
  |
| Gerome's design recognizes that
working room and good access to terminals are important to the corrosion engineer when
he is inside his test station. Uncovered, the terminal board of the Series 700 is wide
open and available from every side. Covered, it is a neat appearing aluminum casting of
rugged quality. |
Series 800
Pipe Mounted Test Station
5 terminals standard
Up to 7 terminals available
Screw-on cover
Body and cover of cast aluminum
Watertight with O-ring seal
Thread sizes: 3/4", 1" 1-1/4"
4-1/2" diameter
Shipping weight: 2-1/2 lbs
|
 |
Series 900
Front and Back Access
5 terminals standard
Up to 7 terminals available
Cast aluminum cover
Waterproof
Slip fit: 3"
Threaded: 3"
11" high, 4-1/2" diameter
Shipping weight: 4-1/2 lbs
|
 |
Series 1000
Pipe Mounted Test Station
8 terminals standard
Other sizes available
32 square inches of terminal board
Double hub
Dual conduit entry
Easily takes 2/0 cable in and out
8" high, 8-3/8" wide, 2-1/2" deep
Sip fit: 1", 1-1/4"
Thread sizes: 1", 1-1/4"
Shipping weight: 5 lbs
|
 |
Series 2000
Pipe Mounted Test Station
8 terminals standard
Other sizes available
32 square inches of terminal board
Single hub
Single conduit entry up to 3 inches.
Easily takes 2/0 cable in and out
9" high, 8-3/8" wide, 2-1/2" deep
Slip fit: 1-1/2", 2", 3",
4"
Thread sizes: 1-1/2", 2", 3"
Shipping weight: 5-1/2 lbs
|
 |
Series 3000
Marker Plate
Cast aluminum markers
Logo available on one or both sides
6-1/4" high, 7-1/4" wide
Slip fit: 2"
Shipping weight: 1-1/2 lbs
|
 |
Series 4000
Vent
Cast aluminum vent
Top slot to hold marker (pictured on right side of grouping)
3-3/8" high, 7-1/4" diameter
Shipping weight: 3 lbs
|
 |
Series 5000
Vent with Marker Plate
Cast aluminum vent with marker
Logo available on one or both sides
4-7/8" high, 7-1/4" wide
Slip fit: 2", 2-1/2", 3", 4"
Shipping weight: 4 lbs
|
 |
Series 9007
Combination Vent & Test
Station
- Cast aluminum
- Nickel plated brass terminals
- Stainless steel cover bolts with
stainless steel helicoils
- Slip fit: 3"
- Standard 5 terminals, available vent
only -- no board, and cast name plate
- 4-7/8" length, 7-1/4" deep
- Shipping weight: 4-1/2 lbs.
|
 |
|
