IsoJoint, Meter Service Fitting by APS

The Replacement Solution for Insulation Unions that have High Failure Rates.

Description

Meter Service Fittings are manufactured in accordance with the highest technical standards which guarantee: • Mechanical requirements are met for the specific need of meter installations. • Insulating requirements are achieved and surpass the electrical characteristics of the product transported through the pipe.

  • Does not require maintenance for lifetime of 20 years
  • Easy, accurate, and safe installation
  • Can be threaded into line, welded without leakage or damage to internal insulators
  • No worry of ill fitting parts
  • Internally lined and externally coated with Nitrocellulose Enamel
  • Integral part of the joint with electrical and dielectrical characteristics and strong resistance to chemical agents
  • High tensile with traction and bending
  • Suitable for above ground work up to 10 BAR=150 PSI with constant operating pressure
  • Guaranteed sealing if pressure raised beyond maximum operating level; hydraulically tested at 15 BAR=220 PSI
  • Two internal seal bushings
  • Not consumable, can be re-used
     

 Meter Service Fittings are manufactured in accordance with the highest technical standards which guarantee: 

  • Mechanical requirements are met for the specific needs of a plant – Full technical details should be supplied.
  • Insulating requirements are met and surpassed in regard to the electrical characteristics of the product carried in the pipeline

When ordering, please give the following information: 

  • Diameter of pipe
  • Style, Male/Male etc...
     

Now available from APS, Copper and Steel Water Service Fittings Available:

  • M x M NPT Thread
  • M x F NPT Thread
  • MNPT x Weld
  • FNPT x Weld
  • Weld x Weld
  • F x F NPT