Lida Anode "Net" by De Nora Tech

MMO Mesh Anode for Quick Installation in Structural Concrete Structures

Description

Even current distribution the highly expanded mesh pattern provides uniform cathodic protection current to the rebars.
Pre-fabricated the LlDA® NET Anode arrives at the job site ready to be rolled out, fastened down and connected.
Quick all weather installation no need to wait for curing, mixing of chemicals, cutting of slots or spraying of paints; there are no electrical splices in the concrete.

Activation coating mixed metal oxide coating; the LlDA® NET produces mainly oxygen.
Quality control LlDA® NET Anode is manufactured under strict quality control procedures, quality control certificates are provided on request .

Typical Installations

Material Specifications
Technical Data	Unit	LIDA®CN15	LIDA®CN25	LIDA®CN25 LIDA®CN35
Maximum rated current output per unit of concrete surface	mA/m2	20	30	40
FHWA maximum anode current density (*)	mA/m2	110	110	110
*Anode current density may be increased to 220 mA/m2. In the short term, during initial polarization, the anode current density may be increased to 400 mAm2.
Expected design life	Year	100	100	100
Substrate Composition	ASTM B 265 Titanium grade 1
Catalyst	Mixed Metal Oxide for Oxygen Evolution
Nominal diamond dimensions	mm	85 x 38	62 x 22	40 x 19
Nominal thickness (Approx)	mm	1.8	1.8	2
Lengthwise Electrical Resistance (1.2 m wide strip )	Ohm/m	0.080	0.070	0.039
	Widthwise Electrical Resistance
With current distributor type 1	Ohm/m	0.013	0.011	0.009
With current distributor type 2	Ohm/m	0.017	0.013	0.011
	NET roll nominal dimensions
Width	m	1.2	1.2	1.2
Length	m	50	50	50
Weight per roll (Approx)	Kg	10	13	16
Weight/m2 of NET (Approx)	Kg/m2	0.16	0.22	0.27
Current distributor	Dimensions		Electrical resistance
Type 1	15 mm (width) x 1 mm (thickness)		0.037 Ohm/m
Type 2	10 mm (width) x 0.5 mm (thickness)		0.11 Ohm/m