MMO Linear Wire Anodes by Farwest Corrosion
Description
Farwest Corrosion’s MMO linear wire anode is an ideal product for use when a low-current, distributed cathodic protection system is needed. Typical uses for this style of anode include the protection of tank bottoms, pipeline systems and other underground structures.
At the heart of the anode system is high-grade, titanium wire with a Mixed Metal Oxide (MMO) catalyst coating, which serves as the anode. There are three choices of anode wire diameters, which dictates the current output rating for the anode.
The anode wire is prepackaged in a porous, non-woven fabric “sock” that contains calcined petroleum coke breeze to reduce the resistance-to earth of the anode circuit and to increase the life of the anode. The sock diameter is approximately 1.5 inches and is installed right from the factory provided reel into the trench.
Material Specification:
Substrate: ASTM B348 Grade I / II Titanium
Catalyst: Mixed Metal Oxide
Cable: #6 AWG cable with either HMWPE or Kynar/HMWPE insulation.
MMO wire-to-cable connections are crimped at 5 to 10 meter intervals as required
Product Advantages:
Easy handling and installation
Cost effective
Up to 50-year service life depending on output
Anode Header Cable
The header cable, in parallel to the anode wire, is #6 AWG stranded copper with either high molecular weight polyethylene (HMWPE) insulation or a dual insulation of Kynar/HMWPE. The MMO anode wire is connected to the header cable via a high-pressure crimp connector to ensure a low resistance connection. That connection is then sealed in a splice kit with epoxy resin to prevent water intrusion.
Connection Diagram
For pricing, delivery information or additional technical information, please contact a Farwest Corrosion representative for assistance at 888-532-7937 or by email at [email protected]
Specification
Anode Header Cable
| MMO wire diameter | 1.0mm | 1.5mm | 3.0mm |
| Titanium substrate | ASTM B348 Grade I / II | ||
| Mixed Metal Oxide Catalyst | Ir-Ta | ||
| Est. current output, 20 years | 20 mA/ft (67mA/m) | 27 mA/ft (89mA/m) | 59 mA/ft (195mA/m) |
| Est. current output, 30 years | 13 mA/ft (45mA/m) | 19 mA/ft (65mA/m) | 39 mA/ft (130mA/m) |
| Est. current output, 50 years | 8.5 mA/ft (28mA/m) | 12.5 mA/ft (41mA/m) | 23 mA/ft (78mA/m) |
| Backfill | Calcium Petroleum Coke | ||
| Sock material | Porous non-woven fabrics | ||
| Sock dimension | 1.5 Inches (38 mm) diameter | ||
| Lenght per reel | 492 feet (150 meters). Customized lengths can be provided. | ||
| Customized reel lengths and current output variations are available at request. | |||
Standard Reel Specification
|
Anode Wire Type |
Reel |
Net Weight |
Gross Weight |
Reel Dimensions |
|
1.0 mm diameter |
1 |
1,389 lbs. |
1,620 lbs |
48” x 48” x 39” |
