Fluke 87V Industrial Multimeter

SKU#: 04-13096
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.
$561.99

Attachments

  • The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

     

    • Easy-access door for fast battery changes without breaking the calibration seal
    • Analog bar graph for fast changing or unstable signals
    • Large digit display with bright, two-level backlight for easier reading in low light
    • Touch Hold keeps readings on display even after removing probes

     

    The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

     

    Built to highest safety standards

    All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

     

    Removable holster with built in test lead and probe storage for convenience

    The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

     

    Additional measurement features

    The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty.

  • Specifications
    Voltage DC Maximum voltage 1000 V
    Accuracy ±(0.05% + 1)
    Maximum resolution 10 µV
    Voltage AC Maximum voltage 1000 V
    Accuracy ±(0.7% + 2) True RMS
    AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz
    Maximum resolution 0.1 mV
    Current DC Maximum amps 10 A (20 A for 30 seconds maximum)
    Amps accuracy ±(0.2% + 2)
    Maximum resolution 0.01 µA
    Current AC Maximum amps 10 A (20 A for 30 seconds maximum)
    Amps accuracy ±(1.0% + 2) True RMS
    Maximum resolution 0.1 µA
    Resistance Maximum resistance 50 MΩ
    Accuracy ±(0.2% + 1)
    Maximum resolution 0.1 Ω
    Capacitance Maximum capacitance 9,999 µF
    accuracy ±(1% + 2)
    Maximum resolution 0.01 nF
    Frequency Maximum frequency 200 kHz
    Accuracy ±(0.005% + 1)
    Maximum resolution 0.01 Hz
    Duty cycle Maximum duty cycle 99.9%
    Accuracy ±(0.2% per kHz + 0.1%)
    Maximum resolution 0.1%
    Temperature measurement -200.0 °C to 1090 °C
    -328.0 °F to 1994.0 °F
    excluding probe
    80 BK temperature probe -40.0 °C to 260 °C
    -40.0 °F to 500 °F, 2.2 °C or 2% whichever is greater
    Conductance Maximum conductance 60.00 nS
    Accuracy ±(1.0% + 10)
    Maximum resolution 0.01 nS
    Diode Range 3 V
    Resolution 1 mV
    Accuracy ±(2% + 1)
    Duty cycle range Accuracy Within ±(0.2% per kHz + 0.1%)
    Environmental Specifications
    Operating temperature –20 °C to + 55 °C
    Storage temperature –40 °C to + 60 °C
    Humidity (without condensation) 0% – 90% (0 °C – 35 °C)
    0% – 70% (35 °C – 55 °C)
    Operating Altitude 2000 m
    Safety Specifications
    Overvoltage category EN 61010–1 to 1000 V CAT III, 600V CAT IV
    Agency approvals CE, CSA, RCM
    Mechanical and General Specifications
    Size 201 x 98 x 52 mm (with holster)
    Weight 355 g
    624 g – with holster
    Display Digital 6000 counts updates 4/sec.
    19,999 counts in high–resolution mode
    Analog 32 segments, updates 40/sec
    Frequency 19,999 counts, updates 3/sec at > 10 Hz
    Warranty Lifetime
    Battery Life Alkaline ~400 hours typical, without backlight
    Shock 1 Meter drop per IEC 61010–1:2001
    Vibration Per MIL–PRF–28800 for a Class 2 instrument