By continuing to browse this website or by clicking 'I Accept', you agree to the use of cookies. Cookies are stored on your computer or mobile device and enhance your site experience. To learn more about how we use cookies, you can click the 'Learn More' button.
Dual displays allow viewing amperage and voltage simultaneously.
Description
The Amprobe ACD-14 PLUS multimeter is the professionals’ choice for both HVAC and Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 28 mm. Both meters also measure Capacitance and Frequency. Very versatile clamp multimeters to support all your daily measurement needs.
Features
Dual Displays – Permits simultaneous reading of Amperage & Voltage
AC Current to 600A
New thin jaws, 5 mm thinner than others to access tight measurement spaces
Micro Amps measurement for testing Flame Sensors
Capacitance to 3000 µF
Temperature with Type-K thermocouple probe
AC and DC Voltage to 600V
Resistance to 40 MΩ
Continuity Buzzer
Frequency measurement
Diode test
Hold and Maximum reading functions
Inrush current
Accommodates conductors up to 28 mm (1.1”) in diamete
-20°C to +537°C & -4°F to +999°F with Type K thermocouple
Display
Dual 3-3/4 digit (4000 count) LCD display
Update Rate
3 per second
Polarity
Automatic
Operating Temperature
0°C to 40°C
Relative Humidity
< 80% RH up to 31°C decreasing to 50% RH at 40°C
Altitude
Operation below 2000 m. Indoor use.
Storage Temperature
-20°C to 60°C, < 80% RH (with battery removed)
Low Battery
Below approx. 2.4V
Power Supply
Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032)
Power Consumption
2.5 mA typical
Battery Life
95 hrs approx. in DCV mode.
Auto Power Off
After being idle for 30 minutes
Max Conductor Diameter
28 mm (1.1")
Dimensions
190 x 63 x 32 mm (7.5 x 2.5 x 1.3 in)
Weight
204 gm (0.45 lb)
Safety & EMC
Meets CE EN61010-1, EN61010-2-032 - Pollution Degree 2
Related Products
ACD-14 TRMS-PLUS 600A Clamp-On Multimeter
Included Accessories
Test leads, carrying case, bead type, thermocouple with banana plug, users manual.
Optional Accessories
ELS2A
Line splitter
ACF-3000AK
3000A AC Flexible Clamp-On Attachment
TA-1A
Temperature Adapter
TL36A
Heavy Duty Test Leads with Threaded Alligator Clips
Description
The Amprobe ACD-14 PLUS multimeter is the professionals’ choice for both HVAC and Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 28 mm. Both meters also measure Capacitance and Frequency. Very versatile clamp multimeters to support all your daily measurement needs.
Features
Dual Displays – Permits simultaneous reading of Amperage & Voltage
AC Current to 600A
New thin jaws, 5 mm thinner than others to access tight measurement spaces
Micro Amps measurement for testing Flame Sensors
Capacitance to 3000 µF
Temperature with Type-K thermocouple probe
AC and DC Voltage to 600V
Resistance to 40 MΩ
Continuity Buzzer
Frequency measurement
Diode test
Hold and Maximum reading functions
Inrush current
Accommodates conductors up to 28 mm (1.1”) in diamete