Amprobe ACD-14 TRMS PLUS Dual-Display, True RMS 600A Clamp-On Multimeter
Description
The Amprobe ACD-14 TRMS-PLUS multimeter is the professionals’ choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments.
Features
- True RMS (TRMS) voltage & current measurement
- Dual Displays – Permits simultaneous reading of Amperage & Voltage
- True RMS for precise measurement result
- New thin jaws, 5 mm thinner than others to access tight measurement spaces
- Micro Amps measurement for testing Flame Sensors
- Capacitance to 3000 µF
- Temperature with Type-K Thermocouple probe
- AC and DC Voltage to 600V
- Resistance to 40 MΩ
- AC Current to 600A
- Frequency measurement
- Diode test and Continuity Buzzer
- Hold and Maximum reading functions
- Inrush current
- Accommodates conductors up to 28 mm (1.1”) in diameter
- Auto ranging
- Auto power off and low battery indication
- Rubber over-molded case
- Wide choice of Amprobe multimeter accessories
Specifications
|
DC Voltage Ranges |
400.0 mV, 4.000, 40.00, 400.0 V, 600 V |
|
DC Voltage Accuracy |
± 0.5% rdg ± 3 digits (± 1.0% rdg ± 4 digits on 600V scale) |
|
DC µA |
400.0 µA, 2000 µA |
|
AC Voltage Ranges |
4.000, 40.00, 400.0 V, 600 V (50-500 Hz) |
|
AC Voltage Accuracy |
± 1.5% rdg ± 5 digits (± 2.0% rdg ± 5 digit on 600V scale) |
|
AC µA |
400.0 µA, 2000 µA (50-500 Hz) |
|
Input Impedance |
10 MΩ |
|
Transient Protection |
6.5 kV (1.2 / 50 μs surge) |
|
AC Current (clamp-on) |
40.00, 400.0, 600 A (50-500 Hz) |
|
AC Current Accuracy |
± 1.5% rdg ± 8 digits |
|
Overload Protection |
600A rms continuous |
|
True RMS Sensing |
10% to 100% of range |
|
Resistance Ranges |
400.0 Ω, 4.000, 40.00, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ |
|
Frequency Ranges |
0 Hz to 100 kHz (depending on signal type) |
|
Capacitance Ranges |
50.00 nF, 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF |
|
Diode Test |
< 1.6 VDC @ 0.25 mA |
|
Audible Continuity Test |
Between 10 Ω and 120 Ω |
|
Temperature Ranges |
-20°C to +537°C & -4°F to +999°F with Type K thermocouple |
|
Display |
Dual 3-3/4 digit (4000 count) LCD display |
|
Update Rate |
3 per second |
|
Polarity |
Automatic |
|
Operating Temperature |
0°C to 40°C |
|
Relative Humidity |
< 80% RH up to 31°C decreasing to 50% RH at 40°C |
|
Altitude |
Operation below 2000 m. Indoor use. |
|
Storage Temperature |
-20°C to 60°C, < 80% RH (with battery removed) |
|
Low Battery |
Below approx. 2.4V |
|
Power Supply |
Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032) |
|
Power Consumption |
2.5 mA typical |
|
Battery Life |
95 hrs approx. in DCV mode. |
|
Auto Power Off |
After being idle for 30 minutes |
|
Max Conductor Diameter |
28 mm (1.1") |
|
Dimensions |
190 x 63 x 32 mm (7.5 x 2.5 x 1.3 in) |
|
Weight |
204 gm (0.45 lb) |
|
Safety |
Meets CE EN61010-1, EN61010-2-032 - Pollution Degree 2 |
|
Related Products |
ACD-14 PLUS 600A Clamp-On Multimeter |
Included Accessories
Test leads, carrying case, bead type, thermocouple with banana plug, users manual.
Optional Accessories
| ELS2A | Line splitter |
| ACF-3000AK | 3000A AC Flexible Clamp-On Attachment |
| TA-1A | Temperature Adapter |
| TL36A | Heavy Duty Test Leads with Threaded Alligator Clips |
