Amprobe ACDC-100 TRMS 1000A AC/DC Clamp-On True RMS Digital Multimeter
Description
Amprobe’s ACDC-100 TRMS AC/DC Digital Clamp-On Multimeter is where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with Red, Rubber, Ribs™ design. The True RMS (TRMS) version addresses needs of professionals who rely on performance and reliability.
Features
- 1000A DC current, 800A AC current
- Large, easy-to-read LCD display
- Auto and manual ranging
- Relative zero mode
- Auto power off
- Data hold
- MAX capture function for inrush current measurements (30 ms response)
- Diode test
- Audible continuity test
- Accommodates conductors up to 2.00” (50 mm) in diameter
- "Third hand" - test probe holder
- Rubber over-molded case with built-in probes storage
- Carrying case, test leads, batteries (installed) and user manual included
- Wide choice of Amprobe multimeter accessories
Specifications
|
DC Voltage Ranges |
400.0 mV, 4.000, 40.00, 400.0 V, 600 V |
|
DC Voltage Accuracy |
± 0.5% rdg ± 3 digits |
|
AC Voltage Ranges |
400.0 mV, 4.000, 40.00, 400.0 V, 600 V |
|
AC Voltage Accuracy |
± 1.5% rdg ± 4 digits (± 2.0% rdg ± 4 digits on 600V scale) |
|
Input Impedance |
10 MΩ |
|
Transient Protection |
6.5 kV (1.2 / 50 μs surge) |
|
AC Current (clamp-on) |
40.00, 400.0, 600 A |
|
AC Current Accuracy |
± 1.5% rdg ± 8 digits |
|
Overload Protection |
1000 A dc or 800A rms continuous |
|
True RMS Crest Factor |
< 1.6:1 |
|
Resistance Ranges |
400.0 Ω, 4.000, 40.00, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ |
|
Frequency Ranges |
0 Hz to 100 kHz (depending on signal type) |
|
Capacitance Ranges |
50.00, 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF |
|
Diode Test |
< 1.6 VDC @ 0.25 mA |
|
Audible Continuity Test |
Between 10 Ω and 120 Ω |
|
Display |
3-3/4 digit (4000 count) LCD display |
|
Update Rate |
3 per second |
|
Polarity |
Automatic |
|
Operating Temperature |
0°C to 40°C |
|
Relative Humidity |
< 80% RH up to 31°C decreasing to 50% RH at 40°C |
|
Altitude |
Operation below 2000 m. Indoor use. |
|
Storage Temperature |
-20°C to 60°C, < 80% RH (with battery removed) |
|
Low Battery |
Below approx. 2.4V |
|
Power Supply |
Two 1.5V AAA Size (NEDA 24G or IEC R03) batteries or two 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline batteries. |
|
Power Consumption |
Typical 11 mA for ACA/DCA and 2.9 mA for other functions |
|
Auto Power Off |
After being idle for 30 minutes |
|
Max Conductor Diameter |
50 mm (2.00 in) |
|
Special Features |
30ms Max Hold; Data Hold; Relative Zero mode |
|
Dimensions |
227x 78 x 40 mm (8.9 x 3.1 x 1.6 in) |
|
Weight |
290 gm (10 oz) |
|
Maximum Conductor |
50 mm (2.00 in) diameter |
|
Safety |
Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003), Category III 600 Volts AC & DC. |
|
Related Products |
Amprobe ACDC-100 AC/DC Clamp-On Multimeter |
