Amprobe Multimeter Accessories

Current clamps, cases, probes, leads, fuses.
  •  

    Part No.

    Description

    TL1500

    Test Leads with Alligator Clips
    Cat IV 1000 V (1500V Max).Supplied with meter.

    FP700

    Replacement Fuse, 2A/1500V. Pack of two.

    TA-1A

    Temperature adapter, K-type thermocouple.

    CT235A

    1000A Amp Clamp Accessory Current Transformer Probe
     

    Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

    Maximum current

    1000A, AC or DC

    Division Ratio

    1000:1

    Output to Meter

    200 A: 1A at jaws = 1 mV to meter
    1000 A: 1A at jaws = 1 mV to meter

    Dimensions

    55 x 220 x 30 mm (2.2" x 8.6" x 1.2")

    Weight

    320 g (0.7 lb)

    Max Conductor Size

    31 mm (1.2")

    Lead Length

    1.5 m (59")

    Power

    9V battery, NEDA 1604, JIS 006P, IEC 6F22

    Battery Life

    50 hours (alkaline)

    Meter Input Impedance

    10 k Ohms min, 100 pF max

    Overload Protection

    700A for 10 min and 20 min Off
    300 Vac on uninsulated conductors

    CT237A

    200A Amp Clamp Accessory Current Transformer Probe
     

    Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

    Current Ranges

    20A, 200A, AC or DC

    Division Ratio

    1000:1

    Output to Meter

    20A: 1A at jaws = 10 mV to meter
    200A: 1A DC at jaws = 1 mV to meter

    Dimensions

    55 x 210 x 30 mm (2.2" x 8.3" x 1.2")

    Weight

    290 g (0.64 lb)

    Max Conductor Size

    19 mm (0.75")

    Lead Length

    1.5 m (59")

    Power

    9V battery, NEDA 1604, JIS 006P, IEC 6F22

    Battery Life

    50 hours (alkaline)

    Meter Input Impedance

    10 k Ohms min, 100 pF max

    Overload Protection

    700A for 10 min and 20 min Off.
    300 Vac on uninsulated conductors.

    CT238A

    20A Amp Clamp Accessory Current Transformer Probe
     

    Converts high AC or DC current to a low level millivolt signal for input directly into a test instrument. Can be used with standard DMMs, recorders, digital or analog meters, data loggers/DAS, oscilloscopes, or other test and measurement instruments.

    Current Ranges

    20A, AC or DC

    Division Ratio

    10:1

    Output to Meter

    1A at jaws = 100 mV  to meter

    Dimensions

    55 x 210 x 30 mm (2.2" x 8.3" x 1.2")

    Weight

    290 g (0.64 lb)

    Max Conductor Size

    19 mm (0.75")

    Lead Length

    1.5 m (59")

    Power

    9V battery, NEDA 1604, JIS 006P, IEC 6F22

    Battery Life

    30 hours (alkaline)

    Meter Input Impedance

    10 k Ohms min, 100 pF max

    Overload Protection

    500A, 300 Vac on uninsulated conductors

    VC221B
    Padded Vinyl Case
    Fits meter & holster.


     

    DC205C
    Deluxe Hard-Shell Carry Case

    DC207C
    Large Deluxe Hard-Shell Carry Case
    With extra space for accessories

    HV231-10A

    Handheld High-Voltage Probe
    High voltage probe for AC or DC extends voltage measuring to 40 kV. Use with standard multimeters with 10 MΩ input impedance.

    Dimensions

    340 mm (13.3") length, 30 mm (1") handle,
    75 mm (3") guard.

    Weight

    218 g (7.7 oz)

    Cable Length

    1 m (39")

    Input Resistance

    1000

    Maximum Voltage

    40 kV peak, 28 kV AC RMS

    Accuracy

    DC (1 kV to 20 kV): ± 1 %
    DC (20 kV to 40 kV): ± 2 %
    AC (1 kV to 20 kV) (50/60 Hz): ± 5 %