Wall Sleeves, by APS

Gal-Vo-Plast® is the new standard coating to replace galvanizing.
  • Description

    Gal-Vo-Plast® wall sleeves prevent corrosion for better durability and longer life.  APS offers stainless steel, carbon steel, and Gal-vo-plast® wall sleeves in 12” standard lengths with a 2” water stop. Diameters range from 2” to 120” and custom lengths are available.

    Two wall sleeves with two different types of protective coatings were submitted for testing at an independent lab. This test consisted of a 500-hour exposure test (equal to two years) in a B 117 salt fog chamber. This test has been used to a considerable extent for the purpose of comparing different materials and finishes.

    One sample had hot dipped galvanized coating and the other had Gal-vo-plast coating. The coatings were of uniform thickness and showed good adhesion.After testing, the submitted wall sleeves were removed from the salt fog chamber for visual examination.

    The visual examination revealed no indications of oxidation on any of the exposed surfaces of theGal-vo-plast coating. The visual examination revealed considerable oxidation of the galvanized coating on all exposed surfaces. 

  • Comparison

    Gal-vo-plast Wall Sleeve
    after 500 hours of exposure
    Galvanized Wall Sleeve 
    after 500 hours of exposure
    Gal-vo-plast Wall Sleeves Galvanized Wall Sleeves
    • More durable
    • Faster availability, especially for custom wall sleeves
    • Longer installation life
    • All coating performed in-house
    • Considerably more economical
    • Does not resist corrosion as long
    • Custom wall sleeves usually require an additional two weeks to galvanize
    • More expensive
    • Must be sent out of factory to be galvanized

     

  • Specifications

    • Quality Assurance• Corrosion Resistant
    • Unlimited Sizes• Easy Installation
    • Customized To Order
    • Fast Turn-around
       

    APS traditional wall sleeves are available in stainless steel and carbon steel with our new Infinity wall sleeve manufactured in HDPE. The standard length is 12”; longer and shorter lengths are available. Steel wall sleeves are available in sizes from 2” to 120” diameter.


       
    Steel Wall Sleeve
    Nominal Size (in) Sleeve I.D. (in)
    2 2.067
    2-1/2 2.469
    3 3.068
    3-1/2 3.548
    4 4.026
    6 6.065
    8 7.981
    10 10.020
    12 12.000
    14 13.250
    16 15.250
    18 17.250
    20 19.250
    22 21.250
    24 23.250
    26 25.250
    28 27.250
    30 29.250
    32 31.250
    34 33.250
    36 35.250
    40 39.250
    42 41.250
    Larger sizes available up to 120"
      
    Infinity Wall Sleeves
    Model I.D. (in) lbs.
    IS-2 1.98 0.70
    IS-3 2.94 1.30
    IS-3.5 3.38 1.50
    IS-4 4.03 2.00
    IS-5 5.14 2.80
    IS-6 6.14 3.60
    IS-8 8.21 4.80
    IS-10 10.19 6.40
    IS-12 12.26 7.20
    IS-14 14.14 11.20
    IS-16 16.18 12.00
    IS-18 17.45 15.50
    IS-20 19.12 17.50
    IS-22 20.32 21.00
    IS-24 22.76 22.00
    IS-25 24.81 23.00