Toggle Nav
Cart 0
Search
Advanced Search
Menu
Account
Loading...

Chlor*Test "CSN Salts" Chloride/Sulfate/Nitrate Ion Test Kit By Chlor*Rid Int'l

Detects and measures chlorides in concrete.

Starting at $200.00

SKU
CHLOR*TEST "CSN Salts" Chloride / Sulfate / Nitrate Ion Test Kit
Grouped product items
Product Name Qty
Chlor*Test "CSN Salts", Chlorides, Sulfates, Nitrates on Surfaces (kit of 5 each tests) by CHLOR*RID
$1,400.00
Chlor*Test "CSN Salts", Refill, (5 of each test) by CHLOR*RID
$200.00
Chlor*Test "CSN Salts", Refill, Bulk Pack (box of 50 refills) by CHLOR*RID
$1,800.00
Add to Wish List Add to Compare

CHLOR*TEST "CSN Salts"
A new Generation of Test Kits

Most specifications do not address sulfate or nitrates because there has never been a sulfate or nitrate field test kit. Now there is a complete field test kit available that tests all three salts. The revolutionary new method for testing salt contamination is the most accurate field test on the market today.

               


Cross-contamination is eliminated with one-time use components.

Nitrate testing is easy and measures a wide 0-50 ppm range.

Easy to perform -- does not require special training.

Recommended for surface testing on:
  • Pipelines
  • Storage tanks
  • Bridges
  • Aircraft
  • Mining facilities
  • Ships
  • Marine structures
  • Cooling towers
  • Power plants
  • Offshore rigs
  • Petrochemical plants
  • Pulp and paper mills
  • Steel fabrication
  • Electronics

 

CHLOR*TEST "CSN Salts" offers to the specifier the availability of trouble-free performance testing, in the field, for chlorides, sulfates and nitrates with one extraction.

CHLOR*TEST "CSN Salts" uses a unique patented extract solution, CHLOR*EXTRACT™, to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results. Surface sampling is simplified by use of the patented CHLOR*SLEEVE™. Sampling can be done overhead, vertically, horizontally, or at any angle with this device.
  • All test results are measured directly in parts per million. No conversion charts are needed. Part-per-million readings are a 1-to-1 ratio to micrograms per square centimeter. No mathematical calculations are necessary.
      
  • EPA-compliant. No need to select a low or high range. Meter range is 0-100 ppm with auto-zero.
      
  • European CE Mark of compliance for electromagnetic compatibility and safety.
      
  • Quantitative results achieved in minutes.
      
  • Five (5) individual tests per test kit. Test kit refills available.

All components are pre-measured and pre-dosed for accuracy.
 
 
Colorimeter Specifications
  • Water resistant design
  • Auto-zero
  • Hinged light cover
  • Digital direct readings
  • European CE-mark compliant
  • EPA-compliant
  • 9-volt power source (included)
  • Single wavelength
  • Photometric ±0.001 absorbancy
  • Accuracy ±1 ppm
  • Low battery warning (BAT)
  • Overrange indication (Er2)
  • Burnt-out bulb indication (Er3)
 Optional Accessories
  • AC adapter: 110 Vac,  60Hz, or 220 Vac, 50 Hz
  • RS-232 interface cable
   Maximize corrosion protection. Reduce premature coating failure.
   Test every surface for salt contamination before coating application.