ColorTape, Primer-Integrated Petrolatum Tape by Denso

Description

Denso ColorTape is composed of a non-woven synthetic fabric carrier, fully impregnated with a stable pigmented petrolatum compound. Available in white, gray and blue (other colors available upon special order).

Uses

Denso ColorTapes are designed to withstand extreme temperature variations. Provides long term corrosion protection to wet or dry pipes, flanges, valves and related surfaces. It is specially stabilized and pigmented for use above ground where appearance is important.

Features

• Does not require a primer
• Applied to marginally prepared surfaces (SSPC SP 2-3)
• Conforms to irregular shapes and profiles
• Can be applied to cold, wet surfaces
• Not effected by water, acid, salts or soil organics
• Encapsulation of lead paint
• Contains no solvents
• Easy application from arctic to tropical temperatures
• Ready for immediate service after application
• Meets AWWA C217 Standard
• Can be used above and below ground

Application

Prepare surfaces by removing all loose scale, rust or other foreign matter in accordance to SSPC SP2 "Hand Tool Cleaning" or SP3 "Power Tool Cleaning". High pressure water wash of 3,000 - 7,000 psi is also suitable. Spirally wrap the tape with a minimum 1" overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams.

Irregular surfaces such as valves, flanges, etc. may require the use of Densyl Mastic or Denso Profiling Mastic. Refer to the product sheets for these specific products for information on application and selection.

Thickness (ASTM D1000)

Weight

Breaking Strength (ASTM 1000)

Water Vapor Transmission
(ASTM E96 - 66 Procedure A)

Elongation @ Break

Breakdown Voltage (55% overlap)

Resistance to Cathodic Disbonding
(ASTM G-8 - 30 days)

Resistance to Acids, Alkalies and Salts

Maximum Service Temperature

Roll Width

Roll Length

Colors