KleerGel by APS

KleerGel is a chemically manufactured, highly engineered synthetic lubricant, environmentally friendly and non-toxic.


This high performance synthetic grease is a non-staining, nontoxic multipurpose lubricant which outperforms all petroleum based greases and many synthetic greases. KleerGel’s product is free of contamination performs extremely well at high and low temperatures and under demanding conditions.Synthetic lubricants, by nature, are not as easily prone to oxidation, emulsification and other destructive chemical reactions as petroleumbased greases.  KleerGel further improves the performance of its grease with special anti-wearing, antirusting, and anti-oxidative additives.Petroleum based greases contain impurities which reduce film strength and decrease wear protection.  These greases are produced by adding thickeners (calcium, sodium, lithium) to petroleum based oils, which form harmful deposits at high temperatures and solidify at low temperatures. 



  • Reduces costs by lasting on average four times longer than petroleum base lubricants
  • Non-flammable, non-staining, non-toxic, clear and environmentally safe
  • Machinery wears less and runs cooler increasing its life expectancy
  • Decreases friction thereby reducing energy consumption
  • Replaces all other specialized products, reducing inventory and confusion
  • Reduces maintenance costs


  • Non-toxic and non-staining with clear appearance
  • Excellent adhesion – will not drip, run or evaporate
  • Will not damage wood, leather, plastic, fabrics, metals or painted surfaces
  • Maintains good viscosity over wide temperature ranges (-50°F to 500°F)
  • Has anti-oxidant, anti-corrosive and anti-wear additives to ensure prolonged use (about four times longer life than conventional petroleum grease)
  • Dielectric – will not conduct electricity
  • Compatible with conventional petroleum based greases
  • Biodegradable and non-flammable
  • 100% synthetic with no petroleum distillates or contaminants
  • Hydrophobic – 100% waterproof and will not wash out with hot, cold or salt water
  • Industrial grade lubricate that is safe to use on bicycles, recreational vehicles, boats, automobiles and an unlimited number of household items
  • Thixotropic properties provide excellent viscosity characteristics which insures continued protection during wide temperature and load shearing changes
  • USDA H-1 Category approved – meat and poultry plants with incidental food contact


KleerGel Can be used for but not limited to:

Ball and roller bearings
Plain and anti-friction bearings
Wheel bearings
Disc brake assemblies
Paving equipment
Food processing equipment
Switch assemblies
Water pumpsChassis points
Fishing reels
Fifth wheels
Car doors
Hand trucks
Radio antenna assemblies
Gaming machines
Snow removal equipment
Electronic equipment
Electric motor bearing
Open gears
Parking meters
Garage door tracks
Industrial machinery


Shelf Life - > 10 years

Dielectric strength - 500 volts/mil (ASTM-D149)

Water Content - (Karls Fisher Method) <.001%

Salt Spray Test - Pass (ASTM D2596)

Solubility in Water - Insoluble


KleerGel Petroleum Based Lubricant
Special ingredients provide excellent 
viscosity and film strength to reduce wear
Hardens at low temperature
Continuous operation temperatures at 
350°F and 500° F for intermittent use
Forms gummy deposits and carbon at high temperatures
Contains no impurities and remains 
flexible at -50°F
Contains impurities that may cause 
harmful vixcosity changes and decrease wear protection