Model ES/TufBox, Cathodic Protection Rectifiers, Air-cooled, by Universal Rectifier

Aluminum, Free-standing Cabinet with ES "Utility" Rectifier
  • Model ES / TufBox Overview

    Model Model ES / TufBox Cathodic Protection Rectifiers combine the superb electrical features of Universal Rectifiers Model ES Utility Rectifiers with a TufBox enclosure for outdoor mounting. The rectifiers are sturdy, secure, and easy to install and service.

    Electrical Features
    • Circuit breaker.
    • Ammeter.
    • 3 coarse and 6 fine taps.
    • Silicon rectifying elements.
    • Surge protection.
    • AC and DC lightning protection.
    • AC input terminal block.
    • Assembly only 13" high x 5" wide x 5.5" deep.
    • 120V AC single phase input.
    • Standard models for 6V-5A, 6V-10A, 12V-5A, 12V-10A, 20V-5A, 20V-10A, 30V-5A, 40V-5A.
    • Other models available up to 200 Watt DC output.
    Mechanical Features
    • Aluminum construction.
    • Below-grade entry for wiring.
    • Side panels slide up and out.
    • Open Tufbox provides easy access to front and rear of junction box and to below-grade wiring.
    • All test points easy to reach with measuring devices.
    • Using optional extra "side mounting blocks," slotted poles can be attached for mounting markers and other equipment.

    Secure & Vandal-Proof

    A TufBox enclosure is equipped with a stainless steel key that allows quick and easy access. This patented lock is vandal-proof, protecting your important assets.


  • ES Utility Line Rectifier Ordering Guide

    Configure an 8-position model number like ES-I-V 20-5
    Positions from left to right are as follows:

    Position #1: Model

    ES-I = ES Utility Rectifier

    ES-II =ES Utility Rectifier

    Position #2: Output Control Type

    S = Standard Rectifier (Manual taps)
    V = Variac Control
    E = Constant Voltage Control (ES-II only)

    D = Constant Current Control (ES-II only)
    P = Constant Potential Control (ES-II only)
    M = Multiple Modes (ES-II only)

    Position #3: DC Output Voltage*

    List DC Voltage Desired (6V, 12V, 20V, 30V or 40V)

    Position #4: DC Current Output*

    List DC Current Desired (5A or 10A))

    Position #5: Special or Optional Features

    H = Hour Meter (ES-II only)

    K = Red or Green Status Lights ((ES-II only)

     
    * Combinations are 6V-5A, 6V-10A, 12V-5A, 12V-10A, 20V-5A, 20V-10A, 30V-5A,  40V-5A