By continuing to browse this website or by clicking 'I Accept', you agree to the use of cookies. Cookies are stored on your computer or mobile device and enhance your site experience. To learn more about how we use cookies, you can click the 'Learn More' button.
Functionality of a 100 Amp GPS Interrupter with Wireless Connectivity Programming
$2,620.00
The JPL100 is a modern GPS current interrupter using the latest technology in current control and digital communication.
Capabilities:
Interrupts up to 100 Amperes at ±170 VDC and 100 Amperes at 120VAC
Cool to the touch - even at full rated current
Can be sync with JR-1, JR-2, TH100A units
Can provide immediate or scheduled interruption operations
Features:
Compact, lightweight, sturdy construction
WPAN enabled
Configuration is through a user-friendly touch-enabled Androidâ„¢ application.
Contains high accuracy real time clock for best accuracy.
On/Off cycle time: 0.05 second to 65 seconds in millisecond increments.
GPS Antenna can be rotated and re-positioned, and is also removable.
Powered by 4 "D" cell Alkaline 1.5v batteries
Notice: This device contains a lithium battery and according to FAA/IATA regulations, should not be placed in checked baggage. For more information, go to: FAA.Gov/PackSafe
Specifications
Accuracy: On/Off cycles’ accuracy to 1 millisecond, continuing operation shifts less than half second a day
Relay: Solid State
Battery: (4) Standard "D" cell alkaline 1.5v batteries
Estimated Battery Life: 300hrs @ 4s On/Off Cycle
Environmental:
Temperature Range: Based on alkaline batteries @ 0°F to 131°F (-18°C to 55°C)
Rating: IP65 rated
Interrupting Capacity: 100 amps @ 150 V DC
Max Input Voltage (DC): +/- 170 VDC
Max Input Current (DC): 100 Amperes
Max Input Voltage (AC): 120 VAC
Max Input Current (AC): 100 Amperes
Ambient Operating Temp:-40°C to +80°C
Dimensions:
Length: 12.0 inches (30.48 cm)
Width: 6.0 inches (15.24 cm)
Height: 4.0 inches (10.16 cm)
Weight: 4.9 Lb (2.22 kg)
Auto Turn-On: Main power is manually switched ON/OFF, operation schedule can be pre-set while power is on. Auto Start/Stop based on the pre-set schedule (Start/Stop dates, Start/Stop time)
The JPL100 is a modern GPS current interrupter using the latest technology in current control and digital communication.
Capabilities:
Interrupts up to 100 Amperes at ±170 VDC and 100 Amperes at 120VAC
Cool to the touch - even at full rated current
Can be sync with JR-1, JR-2, TH100A units
Can provide immediate or scheduled interruption operations
Features:
Compact, lightweight, sturdy construction
WPAN enabled
Configuration is through a user-friendly touch-enabled Androidâ„¢ application.
Contains high accuracy real time clock for best accuracy.
On/Off cycle time: 0.05 second to 65 seconds in millisecond increments.
GPS Antenna can be rotated and re-positioned, and is also removable.
Powered by 4 "D" cell Alkaline 1.5v batteries
Notice: This device contains a lithium battery and according to FAA/IATA regulations, should not be placed in checked baggage. For more information, go to: FAA.Gov/PackSafe
Specifications
Accuracy: On/Off cycles’ accuracy to 1 millisecond, continuing operation shifts less than half second a day
Relay: Solid State
Battery: (4) Standard "D" cell alkaline 1.5v batteries
Estimated Battery Life: 300hrs @ 4s On/Off Cycle
Environmental:
Temperature Range: Based on alkaline batteries @ 0°F to 131°F (-18°C to 55°C)
Rating: IP65 rated
Interrupting Capacity: 100 amps @ 150 V DC
Max Input Voltage (DC): +/- 170 VDC
Max Input Current (DC): 100 Amperes
Max Input Voltage (AC): 120 VAC
Max Input Current (AC): 100 Amperes
Ambient Operating Temp:-40°C to +80°C
Dimensions:
Length: 12.0 inches (30.48 cm)
Width: 6.0 inches (15.24 cm)
Height: 4.0 inches (10.16 cm)
Weight: 4.9 Lb (2.22 kg)
Auto Turn-On: Main power is manually switched ON/OFF, operation schedule can be pre-set while power is on. Auto Start/Stop based on the pre-set schedule (Start/Stop dates, Start/Stop time)