Toggle Nav
Cart 0 Shopping Cart
Search
Advanced Search
Menu
Account
Loading...

Monitoring Stations & Test Stations for Cathodic Protection by Handley Industries

Farwest is a stocking distributor of the Handley line of cathodic protection test stations.
Terminals on the outside of the lid provide fast, convenient test checks.
Add to Wish List Add to Compare

2-Inch Monitoring Stations

  • Terminals on the outside of the lid provide fast, convenient test checks.
  • Available with pre-wiring to outside terminals in the lid. One red and one black 15" coil of plastic coated, #12 AWG type TW, 600 volt, oil resistant wire is contained in the station.
  • Wires easily uncoil to reach connection points.
  • No wires with terminals only is available.
  • The 15" ABS plastic box has a 2-3/8" I.D. and is available in either straight or flanged top for installation at grade level.
  • Adjustable-to-grade test stations are available upon request.
  • Boxes are flared and squared to prevent pull-out, turning or settling.
  • Cast iron lids are marked "Test". Plastic lids are marked "Test Station" and include a metal reflector for locating.
  • Custom lids may be ordered for an additional charge.
  • A permanent "Real" magnet is in every box for easy location with electronic locator.
  • Monitor lids available in marker posts. See marker post specs to order.
  • Underground installation protects the station from vandalism and is esthetically superior; however, above ground monitor stations are also available.

 

How to Order 2" Monitoring Stations

Build a model number like M2FWA. Start with M2 for a 2" monitoring station. Then fill in the remaining positions from the choices below. Please consult Farwest for any special requirements.

  Position 0.   M2 = 2" monitoring station
  Position 1. Upper tube type.   F = Flanged top, plastic
  S = Straight top
  Position 2. Wiring code.   N = Not wired
  W = Wired
  Position 3. Lid color. Black is standard.   A = Yellow

 

How to Order 2" Monitoring Station Parts & Accessories

For replacement lids, build a model number like LIM2NA. Start with LIM2 for a 2" lid, then fill in the remaining positions from the choices below. The pentagon wrench is PW.

  Position 0.   LIM2 = Lid for 2" monitoring station
  Position 2. Wiring option.   N = Not wired
  W = Wired
  Position 3. Lid color. Black is standard.   A = Yellow

 

 

2-Inch Cathodic Test Stations

  • The 15"ABS plastic box has a 2-3/8" I.D. and is available in either straight or flanged top for installation at grade level.
  • "Adjustable to grade" test stations are available upon request.
  • Terminal blocks are secured in place beneath the lid. Wires are automatically pulled up when the lid is removed.
  • 0, 1, 2 or 5 terminals are available. All terminals are made of solid brass.
  • Boxes are flared and squared to prevent pull-out, turning or settling.
  • Cast iron lids are marked "Test". Plastic lids are marked "Test Station" and include a metal reflector for locating.
  • One piece locking lids are standard. No parts to lose.
  • Custom lids are available for an additional charge.
  • A permanent "Real" magnet is in every box for easy location with electronic locator.
  • Terminal Jumpers are available upon request.
  • Test terminals can be incorporated with Handley valve boxes.
  • Underground installation protects the station from vandalism and is esthetically superior; however, above ground test stations are also available.
  • Test lids are available for marker posts. See marker post specs to order.

 

How to Order 2" Cathodic Test Stations

Build a model number like T2PF5AKNQ. Start with T2 for a 2" cathodic test station. Then fill in the remaining positions from the choices below. Please consult Farwest for any special requirements.

  Position 0.   T2 = 2" cathodic test station
  Position 1. Lid material.   I = Iron
  P = Plastic
  Position 2. Upper tube type.   F = Flanged top, plastic.
  S = Straight top.
  Position 3. Number of terminals   0 = 0 terminals with a board
  1 = 1 terminal on a board
  2 = 2 terminals on a board
  3 = 1 terminal in the wedge nut
  5 = 5 terminals on a board
  6 = 0 terminals, NO terminal board
  Position 4. Lid color.
  Black is standard.		   A = Yellow
  B = Blue
  C = Green
  D = Red
  E = White
  F = Orange
  Position 5. Jumper option.   J = One jumper
  K = Two jumpers
  Positon 6. Magnet. One magnet
  located in the tube is standard.		   M = No magnet at all
  N = One magnet in the wedge nut
  (none on the tube)
  P = Two magnets in the wedge nut
  (none on the tube)
  Position 7. Tube design. A 15" straight
  tube flared at the bottom is standard.		   Q = Telescoping, 18 5/8"-24", flared
  R = Telescoping, 18 5/8"-24", arched

 

How to Order 2" Test Station Parts & Accessories

For replacement lids, build a model number like LIT2P2A1N. Start with LIT2 for a 2" lid, then fill in the remaining positions from the choices below. The pentagon wrench is PW.

  Position 0.   LIT2 = Lid for 2" cathodic test station
  Position 1. Lid material.   I = Iron
  P = Plastic
  Position 2. Number of terminals   0 = 0 terminals with a board
  1 = 1 terminal on a board
  2 = 2 terminals on a board
  3 = 1 terminal in the wedge nut
  5 = 5 terminals on a board
  6 = 0 terminals, NO terminal board
  Position 3. Lid color.
  Black is standard.		   A = Yellow
  B = Blue
  C = Green
  D = Red
  E = White
  F = Orange
  Position 4. Jumper option.   1 = One jumper
  2 = Two jumpers
  Positon 5. Magnet. One magnet
  located in the tube is standard.		   M = No magnet at all
  N = One magnet in the wedge nut
  (none on the tube)
  P = Two magnets in the wedge nut
  (none on the tube)

 4-Inch Cathodic Test Stations

  • The 18" ABS plastic box has a 4" I.D. and also is standard with a 1-1/2" cast iron flange for heavy duty installation at grade level.
  • "Adjustable to grade" test stations are available upon request.
  • Terminal blocks are secured in place beneath the lid.
  • Wires are automatically pulled up when the lid is removed.
  • 0, 1, 2, or 5 terminals are available.
  • 10 connections on 5 post-type terminals is also available.
  • All terminals are made of solid brass.
  • Boxes are flared and squared to prevent pull-out, turning or settling.
  • Cast iron drop-in or one-piece locking lids marked "Test Station" are available.
  • Custom lids are available for an additional charge.
  • Terminal jumpers are available.
  • Test terminals can be incorporated with Handley valve boxes.
  • Underground installation protects the station from vandalism and is esthetically superior; however, above ground test stations are also available.

How to Order 4" Cathodic Test Stations

Build a model number like T43N2. Start with T4 for a 4" cathodic test station. Then fill in the remaining positions from the choices below. Tube length is 18". Lid color is silver. Please consult Farwest for any special requirements.

  Position 0.   T4 = 4" cathodic test station
  Position 1. Number of terminals   3 = 5 post type terminals on a board
  5 = 5 screw type terminals on a board
  6 = 0 terminals, NO terminal board
  Position 2. Lid type option.
  Locking lids are standard.		   N = Non-locking
  Position 3. Jumper option.   1 = One jumper
  2 = Two jumpers

How to Order 4" Test Station Parts & Accessories

For replacement lids, build a model number like LIT43N1. Start with LIT4 for a 4" lid, then fill in the remaining positions from the choices below. The pentagon wrench is PW.

  Position 0.   LIT4 = Lid for 4" cathodic test station
  Position 1. Number of terminals   3 = 5 post type terminals on a board
  5 = 5 screw type terminals on a board
  6 = 0 terminals, NO terminal board
  Position 2. Lid type option.
  Locking lids are standard.		   N = Non-locking
  Position 3. Jumper option.   1 = One jumper
  2 = Two jumpers