930 Tape Coating for Joints & Fittings by Polyken

- SKU#: Polyken 930 Tape Coating
- Retains conformability over a wide temperature range with an elevated level of shear resistance.
-
System Description
Polyken #930 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine.
Product Features & Benefits
-
Ensures a strong bond & impervious seal. - Conformable to irregular shapes.
Offers a solution for nearly every application. - No release liner.
Makes installation fast and easy. - Worldwide reference lists.
Established in-ground history. - Complies with AWWA Standard C-209.
Reliable, high-performance corrosion protection. - Compatible with generic plant coating systems.
Versatile.
-
-
Product Properties
Product Properties Test method Typical Value
#930-35Typical Value
#930-50Tensile Strength
ASTM D1000 15 lbs/in
(26 N/cm)25 lbs/in
(44 N/cm)Elongation
ASTM D1000 150% Peel Adhesion to Primed Steel
ASTM D1000 225 oz/in
(25 N/cm)300 oz/in
(33 N/cm)Cathodic Disbondment:
ASTM G8 0.25 in radius (6.4 mm) Water Vapor transmission
ASTM E96B 0.07 perm Water Vapor Transmission Rate
ASTM F1249 (100°F, 100% RH) 0.04 g / 100 in2 / 24hr
(0.6 g/m2 / 24 hr)Volume Resistivity
ASTM E257 2.5 x 1016 ohm-cm Dielectric Breakdown
ASTM D1000 650 volts/mil
(25.6 kV/mm)600 volts/mil
( 23.6 kV/mrDielectric Strength
ASTM D149 21 kV 28 kV Insulation resistance
ASTM D1000 1.4 x 107 MOhm 2.0 x 107 MOhm Impact resistance
EN12068 > 8 Nm Penetration resistance
EN12068 Class B30 Product Selection Guide
930-35 & 930-50 Max operating temperature
66°C (150°F)
Recommended primer
Polyken 1027 or 1033A
Additional mechanical layer
Polyken 955 or 954
Compatible line coatings
PE, FBE, Tape & Coal Tar
Recommended pipe preparation
SSPC-SP2, SP3 & SP6 ST 2 1/2 - ST 3
Performance
AWWA C-209
Product Construction
930-35 930-50 Backing
6.5 mils (0.165 mm) 10 mils (0.254 mm) Adhesive
28.5 mils (0.724 mm) 40 mils (1.016 mm) Backing color
(other colors available on request)Black, White Black Coating Requirements
Number of squares of coating =
(width of coating in inches) (area of pipe in square feet)
(width of coating - overlay in inches) (100)Number of squares of coating =
(width of coating in mm) (area of pipe in square meters)
(width of coating - overlay in mm) (9.29)- One square = 100 square feet
- One square = 9.29 square meters
- Area of pipe = diameter x 3.1416 x length
- Polyken Field Joint Application Specifications for Cold Applied Tape Coating System
-
Ordering Information Polyken 930 Tape Coatings are available in roll form.
Ordering Example: 930-35 BLK 2X50FT 1.5930
Polyken # 930 Tape Coating 35
Total tape thickness in mils
35 mils (0.89 mm), 50 mils (1.27 mm)
BLK
Tape backing color
Black (BLK), White (WHI), Blue (BLU)
2
Tape width in inches
1" (25 mm), 2" (50 mm), 4" (101 mm),
6"(152 mm),50FT
Tape roll length in feet
50 ft (15 m)
1.5
Tape inner core diameter in inches
1.5" (38 mm), 3" (75 mm)
For other ordering options, please contact CCP.