932 Cold Applied Pipeline Tape Coating System by Polyken

SKU#: Polyken 932 Cold Applied Pipeline Tape
High-tack butyl rubber adhesive designed for high initial adhesion, even during extreme cold weather application.
  • System Description

    Polyken #932 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The high-tack butyl rubber adhesive is designed for high initial adhesion, even during extreme cold weather applications. The Polyken #932 tape with very tacky adhesive has a plastic release liner to enable proper unwinding of the roll. Coupled with the highly conformable polyethylene backing, the 932 adhesive optimally flows, fills, and instantaneously bonds to the substrate. This versatile tape system can be applied b\y hand or with a wrapping machine.

    Product Features & Benefits

    • Heavy duty adhesive.
      Ensures a strong bond & impervious seal.
    • Conformable to irregular shapes.
      Offers a solution for nearly every application.
    • High-tack adhesive.
      Very useful in extreme cold weather applications.
    • Worldwide reference lists.
      Established in-ground history.
    • Complies with AWWA Standard C-209, EN12068, DIN30672.
      Reliable, high-performance corrosion protection.
    • Compatible with generic plant coating systems.
      Versatile.


  • Product Properties

    Product Properties

    Test method Typical Value
    #932-35
    Typical Value
    #932-50

    Tensile Strength

    ASTM D1000 15 lbs/in
    (26 N/cm)
    25 lbs/in
    (44 N/cm)

    Elongation

    ASTM D1000 150%

    Peel Adhesion to Primed
    Steel

    ASTM D1000 225 oz/in
    (25 N/cm)
    300 oz/in
    (33 N/cm)
    EN12068 8 N/cm
    (81 oz/in
     

    Cathodic Disbondment

    ASTM G8 0.25 in radius (6.4 mm)
    EN12068 0.10 in radius (2.5 mm)

    Water Vapor transmission

    ASTM E96B 0.07 perm

    Water Vapor Transmission Rate

    ASTM F1249
    (100°F, 100% RH)
    0.04 g / 100 in2 / 24hr
    (0.6 g/m2 / 24 hr)

    Volume Resistivity

    ASTM E257 2.5 x 1016 ohm-cm

    Dielectric Breakdown

    ASTM D1000 650 volts/mil
    (25.6 kV/mm)
    600 volts/mil
    ( 23.6 kV/mr

    Dielectric Strength

    ASTM D149 21 kV 28 kV

    Insulation resistance

    ASTM D1000 1.4 x 107 MOhm 2.0 x 107 MOhm

    Impact resistance

    EN12068 > 8 Nm

    Penetration resistance

    EN12068 Class B30

    Product Selection Guide

      932-35 & 932-50

    Max operating temperature

    50°C (122°F)

    Recommended primer

    Polyken 1027 or 1033A

    Additional mechanical layer

    Polyken 955 or 954

    Compatible line coatings

    PE, FBE, Tape & Coal Tar

    Recommended pipe preparation

    SSPC-SP2, SP3 & SP6 ST 2 1/2 - ST 3

    Performance

    AWWA C-209, EN12068, DIN30672 class B30

    Product Construction

      932-35 932-50

    Backing

    6.5 mils (0.165 mm) 10 mils (0.254 mm)

    Adhesive

    28.5 mils (0.724 mm) 40 mils (1.016 mm)

    Backing color
    (other colors available on request)

    Black, White Black, White


    Material Requirements

    Number of squares of coating  =   

    (width of coating in inches) (area of pipe in square feet)
             (width of coating - overlay in inches) (100)
        

    Number of squares of coating  =   

    (width of coating in mm) (area of pipe in square meters)
             (width of coating - overlay in mm) (9.29)


     


  • Ordering Information

    Polyken 932 Tape Coatings are available in roll form.
    Ordering Example: 932-35 BLK 2X50FT 1.5

    932

    Polyken # 932 Tape Coating

    35

    Total tape thickness in mils

    35 mils (0.89 mm), 50 mils (1.27 mm)

    BLK

    Tape backing color

    Black (BLK), White (WHI), Blue (BLU)

    2

    Tape width in inches

    2" (50 mm), 4" (101 mm), 6"(152 mm)

    50FT

    Tape roll length in feet

    50 ft (15 m)

    1.5

    Tape inner core diameter in inches

    1.5" (38 mm), 3" (75 mm)

    For other ordering options, please contact CCP.