Smart Logger with GPS by Cath-Tech
Records C.P. data Correlated to GPS Position
Starting at $3,850.00
SKU
Cath-Tech-Smart-Logger
Used for:
- Stray Current Correction of CIPS and DCVG surveys.
- Telluric current correction of CIPS and DCVG surveys.
- GPS coordinate correction.
- Monitoring of pipe-to-soil potentials.
- Monitoring of rectifier interruption synchronization
Ideal for:
- Correction of CIPS data for stray currents
- Correction of CIPS data for tellurics
- Monitor pipe to soil potentials
Included:
- Smart Logger II
- Test Leads
- GPS magnet mount antenna
- AC charger; 120/240 V AC, 50/60 Hz input
- RS-232 converter
- Owners manual
Features
- Dual input: pipe to soil and shunt
- Portable and rugged
- GPS synchronization with other survey equipment
- Programmable waveform capture
- Every reading is time stamped
- ASCII comma delimited text file. No special software required
- Comprehensive 1 year warranty
Technical Specifications
| Range - Channel 1: | +/- 5 V DC or +/- 25 V DC |
| Range - Channel 2: | +/- 50 mV |
| A/D Converter: | 14 bit |
| AC Rejection: | 100 dB |
| Memory Capacity: | 1 Mb, expandable to 2Mb |
| Input Impedance: | 10 M ohm or 250 M ohm |
| Case: | Plastic with o-ring seal, IP67 rated |
| Dimensions: | 27cm x 25cm x 13cm (10.5" x 10" x 5") |
| Weight: | 3.2 kg (7 lb) |
| Battery: | 7.2 V 4.5 amp hour NiMH |
| User interface: | 240 x 64 graphic LCD with 40 key QWERTY membrane keypad |
| Communications: | RS-232 |
| GPS synchronized with external antenna | |
| Option to log GPS co-ordinates with every reading | |
| Specifications subject to change without notice | |
Used for:
- Stray Current Correction of CIPS and DCVG surveys.
- Telluric current correction of CIPS and DCVG surveys.
- GPS coordinate correction.
- Monitoring of pipe-to-soil potentials.
- Monitoring of rectifier interruption synchronization
Technical Specification
- 1 Mbyte non volatile CMOS memory.
- Input Impedance 10 MOhm.
- 12-satellite GPS engine.
- 2 AH, 12V rechargeable gel cell battery.
- Housed in rugged plastic case.
Features
- Keypad and four-line LCD display.
- GPS engine for 10-6 timing accuracy
- Two modes of operation:
1) GPS synchronized ON and OFF potentials, 2) Definable sample and logging times. - Programmable logging of GPS time and coordinates.
- RS-232 data and programming port.
Comes with:
- GPS antenna
- Battery charger
- RSs232 cable
- Operator manual
Who Viewed This Also Viewed
