Standard Galvanized Steel Enclosures for Cathodic Protection by Farwest Corrosion

Includes Ventilation, Locking Hasp & Hot-Dipped Galvanized Coating
  • Galvanized steel enclousures are utilized for junction and bond box solutions in the C.P. industry. They provide a low-cost yet durable solution for many field applications.  

    Enclosure Construction

    • Galvanized 16-gauge steel
    • Galvanized steel continuous hinge
    • Hasp provided for padlocking
    • Vents provided on door front
    • Optional pole mount channel available upon request
    • NEMA 3R rated


    Enclosure Finish

    • Galvanized steel only


    Standard Enclosure Sizes (other non-standard sizes are available)

    • Farwest Size JB1212:  12" H x 12" W x 6" D, 12 shunts maximum
    • Farwest Size JB1818:  18" H x 18" W x 6" D, 20 shunts maximum
    • Farwest Size JB1824:  18" H x 24" W x 6" D, 30 shunts maximum
    • Farwest Size JB2424:  24" H x 24" W x 6" D, 40 shunts maximum

    Ordering Information

    • Indicate enclosure size required (See above)
    • Indicate the number of shunts (circuits) required
    • Indicate the type of shunts required
    • Indicate any other needed components such as resistors, rheostates, or similar.
       

    If you have a preference, please indicate the orientation of the shunts.  Farwest normally provides the shunts in a horizontal orientation but can install them in a vertical orientation if required.  Also, provide any custom requirements such as conduit knockouts, etc.

    Non-Standard Configurations

    Other non-standard enclosure materials are available upon request, including aluminum, stainless steel, polycarbonte or fiberglass. Custom junction boxes can be fabricated to meet any field requirement. Please contact Farwest for assistance.

    .