By continuing to browse this website or by clicking 'I Accept', you agree to the use of cookies. Cookies are stored on your computer or mobile device and enhance your site experience. To learn more about how we use cookies, you can click the 'Learn More' button.
5" x 5" Repair Patch for CP Cable Connections. No Liquid Primer Needed!
$23.10
Handy Cap XL IP is a 5" x 5" prefabricated product designed to provide quick, field-applied corrosion protection to anode and test lead cable connection on metal pipe, tanks or similar. This economical product is ideal for use in limited access applications. TheHandy Cap XL IP now adds the innovative technology of Tapecoat Gray Adhesive to its unique design. The integration of a primer in Tapecoat Gray makes field application of Handy Cap XL IP easier and more economical:
No separate liquid primer required.
Ideal for keyhole applications
Dome and tunnel provide easy access
Elastomeric compound encases connection profile
Conforms to small diameter pipe
Maximum Wire Size: 2AWG
Handy Cap XL IP is a larger version of the 4" x 4" Handy Cap IP.
Easy Field-Applied Corrosion Protection
Tapecoat Gray Adhesive bonds the tough outer shell of the Handy Cap IP to the bare metal weld area and surrounding plant applied coating. Innovative Tapecoat Gray incorporates an integrated primer in its adhesive and provides exceptional bonding without the costly application of liquid primer. A protective compound within the dome molds itself over the irregular welded profile and encases the exothermic connection.
1. Clean all mud, dirt, grease, oil and other contaminants from the metal surface and mill coating which is to be covered. The Handy Cap XL IP incorporates an integrated primer in its Tapecoat Gray Adhesive and does not require the use of a liquid primer prior to application.
2. Remove the release paper from the bottom of the Handy Cap XL IP. Bend the plastic sheet inward at the serrations when applying to small diameter pipe. Position and place the Handy Cap XL IP on the welded area with the tunnel over the lead wire.
3. Push the dome of the cap firmly into the weld area. Lift the lead wire away from the pipe and squeeze the adhesive compound completely around and underneath the wire. Push the lead wire back down on the pipe and press the elastomeric compound into firm contact with the pipe over the entire area.
No further protection is required when the Handy Cap XL IP covers the entire exposed metal area. Uncovered areas should be protected with primerless Tapecoat or Royston tapes. Remove the narrow plastic release film to accommodate tool use for keyhole applications.
Construction
Molded plastic dome filled with corrosion resistant compound on a base of thick elastomeric tape.
Dimensions
Overall:
5" x 5"
Plastic sheet:
2.75" x 4" (serrated)
Sheet thickness:
10 mils
Plastic dome:
1.75" dia, 1.5" height
Adhesive thickness:
180 mils
Maximum wire size
#2
Weight
4.8 oz
Application temperature
-20 to +120°F
Service temperature
-40 to + 185°F
Shelf life
Rotate annually
Handy Cap XL IP is a 5" x 5" prefabricated product designed to provide quick, field-applied corrosion protection to anode and test lead cable connection on metal pipe, tanks or similar. This economical product is ideal for use in limited access applications. TheHandy Cap XL IP now adds the innovative technology of Tapecoat Gray Adhesive to its unique design. The integration of a primer in Tapecoat Gray makes field application of Handy Cap XL IP easier and more economical:
No separate liquid primer required.
Ideal for keyhole applications
Dome and tunnel provide easy access
Elastomeric compound encases connection profile
Conforms to small diameter pipe
Maximum Wire Size: 2AWG
Handy Cap XL IP is a larger version of the 4" x 4" Handy Cap IP.
Easy Field-Applied Corrosion Protection
Tapecoat Gray Adhesive bonds the tough outer shell of the Handy Cap IP to the bare metal weld area and surrounding plant applied coating. Innovative Tapecoat Gray incorporates an integrated primer in its adhesive and provides exceptional bonding without the costly application of liquid primer. A protective compound within the dome molds itself over the irregular welded profile and encases the exothermic connection.
1. Clean all mud, dirt, grease, oil and other contaminants from the metal surface and mill coating which is to be covered. The Handy Cap XL IP incorporates an integrated primer in its Tapecoat Gray Adhesive and does not require the use of a liquid primer prior to application.
2. Remove the release paper from the bottom of the Handy Cap XL IP. Bend the plastic sheet inward at the serrations when applying to small diameter pipe. Position and place the Handy Cap XL IP on the welded area with the tunnel over the lead wire.
3. Push the dome of the cap firmly into the weld area. Lift the lead wire away from the pipe and squeeze the adhesive compound completely around and underneath the wire. Push the lead wire back down on the pipe and press the elastomeric compound into firm contact with the pipe over the entire area.
No further protection is required when the Handy Cap XL IP covers the entire exposed metal area. Uncovered areas should be protected with primerless Tapecoat or Royston tapes. Remove the narrow plastic release film to accommodate tool use for keyhole applications.
Construction
Molded plastic dome filled with corrosion resistant compound on a base of thick elastomeric tape.
Dimensions
Overall:
5" x 5"
Plastic sheet:
2.75" x 4" (serrated)
Sheet thickness:
10 mils
Plastic dome:
1.75" dia, 1.5" height
Adhesive thickness:
180 mils
Maximum wire size
#2
Weight
4.8 oz
Application temperature
-20 to +120°F
Service temperature
-40 to + 185°F
Shelf life
Rotate annually
Are you sure you would like to remove this item from the shopping cart?
This item is a part of the approved quote. Removing it will remove all quote items from the cart.