Rugged Wrap by Tapecoat

A 30 mil UV resistant mesh weave fiberglass wrap that offers additional mechanical protection for protective coatings.
  • Description

    RUGGED WRAP – a 30 mil UV resistant mesh weave fiberglass wrap that offers additional mechanical protection for protective coatings. 

    This moisture activated non- shielding overwrap will give coatings and structures increased protection from exposure to abrasion, soil stress, frost heave and mechanical damage above and below grade. 

    Available in many aesthetically pleasing colors including: Silver, White, Yellow, Blue, Black. Other colors upon request. 

    Rugged Wrap maximum service temperature is 350°F (176 oC). 

    Note: Rugged Wrap is a mechanical protective overwrap. Rugged Wrap is not a corrosion preventative coating.

  • Application


    Tool List

    • Rubber Gloves 
    • Water and container or cup for water 
    • Scissors or Knife 

     

    Tape Application

    • Wearing gloves, submerge Rugged Wrap in water till the tape is completely wet (about 30 seconds). 
    • Remove the tape from the water and squeeze excess water from roll.  Applied Tape by hand with a 50% overlap. 
    • Apply tape in a Spiral Wrap whenever possible. 
    • Use hand pressure to seal and smooth out wrinkles. 
    • Rugged Wrap will harden in less then 60 minutes at 70°F (21°C) 

     

    Average Coverage Material Per 10 Unial Feet of Pipe

    Pipe OD 50% Overlap
    2" OD 10 sq. ft.
    4" OD 30 sq ft.
    6" OD 40 sq. ft.

     

  • Packaging

    Tape
    Roll 
    Square
    Foot
    Per Roll 
    Rolls
    Per
    Case 
    Square
    Foot
    Per Case 
    4" X 20" 6.7 sq. ft. 10 rolls 67 sq. ft.
    6" X 30" 15 sq. ft. 5 rolls 75 sq. ft.